1045.6 Laboratory Testing Guidelines for Sec 1045 - Revision history

Smithk: Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

2021-09-14T15:41:39Z

Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

← Older revision		Revision as of 10:41, 14 September 2021
Line 86:		Line 86:
	::Storage – Federal Test Method Std. No. 141, Method 3011		::Storage – Federal Test Method Std. No. 141, Method 3011

	All test data and calculations are to be recorded in Laboratory workbooks. Test results are then to be recorded through ~~SiteManager~~.		All test data and calculations are to be recorded in Laboratory workbooks. Test results are then to be recorded through AASHTOWARE Project (AWP).

	==1045.6.2 Sample Record==		==1045.6.2 Sample Record==
	The sample record shall be completed in ~~SiteManager~~, as described in [[:Category:101 Standard Forms#Sample Record General ~~Information~~\| Sample Record General ~~Information]] [[image:bulldozer.jpg\|20px~~]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in AASHTOWARE Project (AWP), as described in [[:Category:101 Standard Forms#Sample Record, General\|AWP MA Sample Record, General]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

	[[Category:1045 Paint for Structural Steel]]		[[Category:1045 Paint for Structural Steel]]

Smithk: updated links

2016-06-15T17:36:56Z

updated links

← Older revision		Revision as of 12:36, 15 June 2016
Line 1:		Line 1:
	This article establishes procedures for Laboratory testing and reporting samples of paint		This article establishes procedures for Laboratory testing and reporting samples of paint
	and paint materials. Refer to [http://www.modot.~~mo.gov~~/business/standards_and_specs/~~Sec1045~~.pdf Sec 1045] for MoDOT’s specifications.		and paint materials. Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for MoDOT’s specifications.

	==1045.6.1 Procedure==		==1045.6.1 Procedure==
Line 16:		Line 16:
	The following paints shall be tested according to the methods shown for each material.		The following paints shall be tested according to the methods shown for each material.

	:'''a) High Solids Inorganic Zinc Silicate Paint.''' This material is to be tested according to [http://www.modot.~~mo.gov~~/business/standards_and_specs/~~Sec1045~~.pdf Sec 1045.2].		:'''a) High Solids Inorganic Zinc Silicate Paint.''' This material is to be tested according to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045.2].

	:'''b) Intermediate Coat - High Solids Epoxy System G Finish Coat - Polyurethane System G.'''		:'''b) Intermediate Coat - High Solids Epoxy System G Finish Coat - Polyurethane System G.'''

Smithk: updated link

2013-08-22T14:08:40Z

updated link

← Older revision		Revision as of 09:08, 22 August 2013
Line 89:		Line 89:

	==1045.6.2 Sample Record==		==1045.6.2 Sample Record==
	The sample record shall be completed in SiteManager, as described in [~~http~~:~~//contribute.modot.mo.gov/business/materials/pdf/vol_3/AS3510~~.~~pdf Automation Section 3510~~], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [[:Category:101 Standard Forms#Sample Record General Information\| Sample Record General Information]] [[image:bulldozer.jpg\|20px]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

	[[Category:1045 Paint for Structural Steel]]		[[Category:1045 Paint for Structural Steel]]

Smithk: /* 1045.6.2 Sample Record */ Per CM, updated link to AS 3510

2011-07-06T12:28:00Z

1045.6.2 Sample Record: Per CM, updated link to AS 3510

← Older revision		Revision as of 07:28, 6 July 2011
Line 89:		Line 89:

	==1045.6.2 Sample Record==		==1045.6.2 Sample Record==
	The sample record shall be completed in SiteManager, as described in [http://~~wwwi~~/~~intranet~~/cm/~~materials~~/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [http://contribute.modot.mo.gov/business/materials/pdf/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

	[[Category:1045 Paint for Structural Steel]]		[[Category:1045 Paint for Structural Steel]]

Smithk: /* 1045.6.2 Sample Record */ updated link

2010-07-01T18:29:03Z

1045.6.2 Sample Record: updated link

← Older revision		Revision as of 13:29, 1 July 2010
Line 89:		Line 89:

	==1045.6.2 Sample Record==		==1045.6.2 Sample Record==
	The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting ~~Test Results~~\|EPG 106.9 Reporting ~~Test Results~~]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

	[[Category:1045 Paint for Structural Steel]]		[[Category:1045 Paint for Structural Steel]]

Smithk: /* 1045.6.2 Sample Record */ minor clarification

2010-03-31T13:11:09Z

1045.6.2 Sample Record: minor clarification

← Older revision		Revision as of 08:11, 31 March 2010
Line 89:		Line 89:

	==1045.6.2 Sample Record==		==1045.6.2 Sample Record==
	The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting Test Results\|106.9 Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting Test Results\|EPG 106.9 Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

	[[Category:1045 Paint for Structural Steel]]		[[Category:1045 Paint for Structural Steel]]

Smithk: article construction

2008-02-21T15:58:14Z

article construction

← Older revision		Revision as of 10:58, 21 February 2008
Line 1:		Line 1:

	This article establishes procedures for Laboratory testing and reporting samples of paint		This article establishes procedures for Laboratory testing and reporting samples of paint
	and paint materials. Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec1045.pdf Sec 1045] for MoDOT’s specifications.		and paint materials. Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec1045.pdf Sec 1045] for MoDOT’s specifications.
Line 90:		Line 89:

	==1045.6.2 Sample Record==		==1045.6.2 Sample Record==
	The sample record shall be completed in SiteManager, as described in [[Automation ~~Sec~~ 3510]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting Test Results\|106.9 Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting Test Results\|106.9 Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

	[[Category:1045 Paint for Structural Steel]]		[[Category:1045 Paint for Structural Steel]]

Smithk: info from lab manual

2007-09-06T20:39:58Z

info from lab manual

New page

This article establishes procedures for Laboratory testing and reporting samples of paint
and paint materials. Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec1045.pdf Sec 1045] for MoDOT’s specifications.

==1045.6.1 Procedure==

===1045.6.1.1 Pigment and Vehicle Constituents===
Test these materials in accordance with the following methods:

:Inorganic Zinc Silicate Pigment, Metallic Zinc, percent - ASTM D521

:Total Zinc, percent - ASTM D3280.

:Inorganic Zinc Silicate Vehicle- ASTM D1644, Method A.

===1045.6.1.2 Mixed Paint===
The following paints shall be tested according to the methods shown for each material.

:'''a) High Solids Inorganic Zinc Silicate Paint.''' This material is to be tested according to [http://www.modot.mo.gov/business/standards_and_specs/Sec1045.pdf Sec 1045.2].

:'''b) Intermediate Coat - High Solids Epoxy System G Finish Coat - Polyurethane System G.'''

::Sag Resistance, Leneta Anti-Sag Meter - Sec. 4494 FTMS 141

::Viscosity, Krebs - Stormer - ASTM D 562

::Drying Time - ASTM D 1640

::Volatile Organic Content - USEPA Method 24

::Color - Federal Standard No. 595b

::Fineness of Grind, Hegeman Gage - ASTM D 1210

:'''c) Intermediate and Finish Coat Waterborne Acrylic System H'''

::Color, Federal Standard 595b

::Viscosity, Krebs-Stormer - ASTM D 562

::Volatile Organic Content - USEPA Method 24

::Fineness of Grind, Hegeman Gage - ASTM D 1210

::Drying Time - ASTM D 1640

::Sag Resistance, Leneta Anti-Sag Meter - Sec. 4494 FTMS 141

:'''d) Aluminum Epoxy Mastic Primer'''

::Color, Federal Standard 595b

::Volatile Organic Content - USEPA Method 24

::Fineness of Grind, Hegeman Gage - ASTM D 1210

::Drying Time - ASTM D1640

:'''e) Gray Epoxy Mastic Primer'''

::Color, Federal Standard 595b

::Volatile Organic Content - USEPA Method 24

::Fineness of Grind, Hegeman Gage - ASTM D 1210

::Drying Time - ASTM D 1640

:'''f) Calcium Sulfonate Sealer/Primer/Topcoat'''

::Color, Federal Standard 595b

::Volatile Organic Content - USEPA Method 24

::Fineness of Grind, Hegeman Gage - ASTM D 1210

::Viscosity, #4 Ford Cup - ASTM D 1200

::Drying Time – Federal Test Method Std. No. 141, Method 4061

::Sag Test (multi-notch blade) – Federal Test Method Std. No. 141, Method 4494

::Pigment Settlement – ASTM D 869

::Working Properties – Federal Test Method Std. No. 141, Method 4331

::Storage – Federal Test Method Std. No. 141, Method 3011

All test data and calculations are to be recorded in Laboratory workbooks. Test results are then to be recorded through SiteManager.

==1045.6.2 Sample Record==
The sample record shall be completed in SiteManager, as described in [[Automation Sec 3510]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting Test Results|106.9 Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

[[Category:1045 Paint for Structural Steel]]