1055.4 Laboratory Testing Guidelines for Sec 1055 - Revision history

Smithk: /* 1055.4.2 Sample Report */ Per CM, replaced archaic "Automation Section" with AWP MA Sample Record, General

2021-11-24T13:58:03Z

1055.4.2 Sample Report: Per CM, replaced archaic "Automation Section" with AWP MA Sample Record, General

← Older revision		Revision as of 08:58, 24 November 2021
Line 16:		Line 16:

	===1055.4.2 Sample Report===		===1055.4.2 Sample Report===
	The sample record shall be completed in AWP, as described in [~~http~~://~~contribute~~.modot.~~mo.gov/business/materials~~/~~pdf~~/~~vol_3~~/~~MMV3CONT~~.~~pdf Automation Section~~], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[:category: 106 Control of Material#Reporting Test Results\|Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in AWP, as described in [https://epg.modot.org/forms/CM/AWP_MA_Sample_Record_General.docx AWP MA Sample Record, General], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[:category: 106 Control of Material#Reporting Test Results\|Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

	[[Category:1055 Concrete Curing Material]]		[[Category:1055 Concrete Curing Material]]

Smithk: Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

2021-10-18T13:53:18Z

Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

← Older revision		Revision as of 08:53, 18 October 2021
Line 9:		Line 9:
	Samples from each lot of Type l-D - clear or transparent, or Type 2 Class A - white pigmented, materials destined for MoDOT projects shall be tested according to methods set forth in ASTM C 309. Reflectance tests shall be determined by the manufacturer in accordance with ASTM C 309 and furnished to the Department in compliance with Sec 1055.2.1.		Samples from each lot of Type l-D - clear or transparent, or Type 2 Class A - white pigmented, materials destined for MoDOT projects shall be tested according to methods set forth in ASTM C 309. Reflectance tests shall be determined by the manufacturer in accordance with ASTM C 309 and furnished to the Department in compliance with Sec 1055.2.1.

	Original test data and calculations on liquid membrane-forming compounds shall be recorded in Laboratory workbooks. Test results shall be recorded through ~~SiteManager~~ for the appropriate type.		Original test data and calculations on liquid membrane-forming compounds shall be recorded in Laboratory workbooks. Test results shall be recorded through AASHTOWARE Project (AWP) for the appropriate type.

	Waterproof paper shall be tested for Moisture Loss and Tensile Strength in accordance with the methods set forth in ASTM C 171.		Waterproof paper shall be tested for Moisture Loss and Tensile Strength in accordance with the methods set forth in ASTM C 171.
Line 16:		Line 16:

	===1055.4.2 Sample Report===		===1055.4.2 Sample Report===
	The sample record shall be completed in ~~SiteManager~~, as described in [http://contribute.modot.mo.gov/business/materials/pdf/vol_3/MMV3CONT.pdf Automation Section], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[:category: 106 Control of Material#Reporting Test Results\|Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in AWP, as described in [http://contribute.modot.mo.gov/business/materials/pdf/vol_3/MMV3CONT.pdf Automation Section], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[:category: 106 Control of Material#Reporting Test Results\|Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

	[[Category:1055 Concrete Curing Material]]		[[Category:1055 Concrete Curing Material]]

Smithk: updated link

2016-06-15T17:49:09Z

updated link

← Older revision		Revision as of 12:49, 15 June 2016
Line 1:		Line 1:
	This article establishes procedures for Laboratory testing, approving and reporting Type l-D and Type 2 Class A liquid membrane-forming compounds, waterproof paper and white polyethylene sheeting suitable for curing portland cement concrete. Refer to [http://www.modot.~~mo.gov~~/business/standards_and_specs/~~Sec1055~~.pdf Sec 1055] for MoDOT’s specifications.		This article establishes procedures for Laboratory testing, approving and reporting Type l-D and Type 2 Class A liquid membrane-forming compounds, waterproof paper and white polyethylene sheeting suitable for curing portland cement concrete. Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1055] for MoDOT’s specifications.

	===1055.4.1 Procedure===		===1055.4.1 Procedure===
Line 5:		Line 5:
	Preliminary Laboratory approval for Type l-D or Type 2 Class A liquid membrane-forming compounds is based on the following procedure:		Preliminary Laboratory approval for Type l-D or Type 2 Class A liquid membrane-forming compounds is based on the following procedure:
	:(a) Manufacturer shall furnish a one-quart (one liter) sample. Laboratory tests on this sample shall be as set forth in ASTM C 309.		:(a) Manufacturer shall furnish a one-quart (one liter) sample. Laboratory tests on this sample shall be as set forth in ASTM C 309.
	:(b) Manufacturer shall furnish certification and guarantee for a Type 2 Class A white pigmented curing compound as required in [http://www.modot.~~mo.gov~~/business/standards_and_specs/~~Sec1055~~.pdf Sec 1055.2.1].		:(b) Manufacturer shall furnish certification and guarantee for a Type 2 Class A white pigmented curing compound as required in [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1055.2.1].
	:(c) Upon completion of Laboratory tests and receipt of satisfactory manufacturer's certification, the supplier will be notified by letter whether the material is approved for use. Each approved brand and the manufacturer will be added to [http://www.modot.mo.gov/business/materials/pdf/PAL/concrete%20curing%20material.pdf Concrete Curing Material Pre-Acceptance List].		:(c) Upon completion of Laboratory tests and receipt of satisfactory manufacturer's certification, the supplier will be notified by letter whether the material is approved for use. Each approved brand and the manufacturer will be added to [http://www.modot.mo.gov/business/materials/pdf/PAL/concrete%20curing%20material.pdf Concrete Curing Material Pre-Acceptance List].
	Samples from each lot of Type l-D - clear or transparent, or Type 2 Class A - white pigmented, materials destined for MoDOT projects shall be tested according to methods set forth in ASTM C 309. Reflectance tests shall be determined by the manufacturer in accordance with ASTM C 309 and furnished to the Department in compliance with ~~[http://www.modot.mo.gov/business/standards_and_specs/Sec1055.pdf~~ Sec 1055.2.1].		Samples from each lot of Type l-D - clear or transparent, or Type 2 Class A - white pigmented, materials destined for MoDOT projects shall be tested according to methods set forth in ASTM C 309. Reflectance tests shall be determined by the manufacturer in accordance with ASTM C 309 and furnished to the Department in compliance with Sec 1055.2.1.

	Original test data and calculations on liquid membrane-forming compounds shall be recorded in Laboratory workbooks. Test results shall be recorded through SiteManager for the appropriate type.		Original test data and calculations on liquid membrane-forming compounds shall be recorded in Laboratory workbooks. Test results shall be recorded through SiteManager for the appropriate type.

Smithk: /* 1055.4.2 Sample Report */

2013-10-10T15:57:46Z

1055.4.2 Sample Report

← Older revision		Revision as of 10:57, 10 October 2013
Line 16:		Line 16:

	===1055.4.2 Sample Report===		===1055.4.2 Sample Report===
	The sample record shall be completed in SiteManager, as described in [http://contribute.modot.mo.gov/business/materials/pdf/vol_3/MMV3CONT.pdf Automation Section ~~3510~~], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[:category: 106 Control of Material#Reporting Test Results\|Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [http://contribute.modot.mo.gov/business/materials/pdf/vol_3/MMV3CONT.pdf Automation Section], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[:category: 106 Control of Material#Reporting Test Results\|Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

	[[Category:1055 Concrete Curing Material]]		[[Category:1055 Concrete Curing Material]]

Smithk: /* 1055.4.2 Sample Report */ Per CM, updated link

2013-10-10T15:33:17Z

1055.4.2 Sample Report: Per CM, updated link

← Older revision		Revision as of 10:33, 10 October 2013
Line 16:		Line 16:

	===1055.4.2 Sample Report===		===1055.4.2 Sample Report===
	The sample record shall be completed in SiteManager, as described in [http://contribute.modot.mo.gov/business/materials/pdf/vol_3/~~AS3510~~.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[:category: 106 Control of Material#Reporting Test Results\|Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [http://contribute.modot.mo.gov/business/materials/pdf/vol_3/MMV3CONT.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[:category: 106 Control of Material#Reporting Test Results\|Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

	[[Category:1055 Concrete Curing Material]]		[[Category:1055 Concrete Curing Material]]

Smithk: /* 1055.4.1 Procedure */ Per CM, replaced references to an AASHTO test with an ASTM test, to bring guidance into compliance with specs

2013-01-10T17:09:29Z

1055.4.1 Procedure: Per CM, replaced references to an AASHTO test with an ASTM test, to bring guidance into compliance with specs

← Older revision		Revision as of 12:09, 10 January 2013
Line 4:		Line 4:

	Preliminary Laboratory approval for Type l-D or Type 2 Class A liquid membrane-forming compounds is based on the following procedure:		Preliminary Laboratory approval for Type l-D or Type 2 Class A liquid membrane-forming compounds is based on the following procedure:
	:(a) Manufacturer shall furnish a one-quart (one liter) sample. Laboratory tests on this sample shall be as set forth in ~~AASHTO M148~~.		:(a) Manufacturer shall furnish a one-quart (one liter) sample. Laboratory tests on this sample shall be as set forth in ASTM C 309.
	:(b) Manufacturer shall furnish certification and guarantee for a Type 2 Class A white pigmented curing compound as required in [http://www.modot.mo.gov/business/standards_and_specs/Sec1055.pdf Sec 1055.2.1].		:(b) Manufacturer shall furnish certification and guarantee for a Type 2 Class A white pigmented curing compound as required in [http://www.modot.mo.gov/business/standards_and_specs/Sec1055.pdf Sec 1055.2.1].
	:(c) Upon completion of Laboratory tests and receipt of satisfactory manufacturer's certification, the supplier will be notified by letter whether the material is approved for use. Each approved brand and the manufacturer will be added to [http://www.modot.mo.gov/business/materials/pdf/PAL/concrete%20curing%20material.pdf Concrete Curing Material Pre-Acceptance List].		:(c) Upon completion of Laboratory tests and receipt of satisfactory manufacturer's certification, the supplier will be notified by letter whether the material is approved for use. Each approved brand and the manufacturer will be added to [http://www.modot.mo.gov/business/materials/pdf/PAL/concrete%20curing%20material.pdf Concrete Curing Material Pre-Acceptance List].
	Samples from each lot of Type l-D - clear or transparent, or Type 2 Class A - white pigmented, materials destined for MoDOT projects shall be tested according to methods set forth in ~~AASHTO M148~~. Reflectance tests shall be determined by the manufacturer in accordance with ~~AASHTO M148~~ and furnished to the Department in compliance with [http://www.modot.mo.gov/business/standards_and_specs/Sec1055.pdf Sec 1055.2.1].		Samples from each lot of Type l-D - clear or transparent, or Type 2 Class A - white pigmented, materials destined for MoDOT projects shall be tested according to methods set forth in ASTM C 309. Reflectance tests shall be determined by the manufacturer in accordance with ASTM C 309 and furnished to the Department in compliance with [http://www.modot.mo.gov/business/standards_and_specs/Sec1055.pdf Sec 1055.2.1].

	Original test data and calculations on liquid membrane-forming compounds shall be recorded in Laboratory workbooks. Test results shall be recorded through SiteManager for the appropriate type.		Original test data and calculations on liquid membrane-forming compounds shall be recorded in Laboratory workbooks. Test results shall be recorded through SiteManager for the appropriate type.

Smithk: Per Bridge, AASHTO M171 replaced with ASTM C 171 (since the former no longer exists).

2011-10-27T19:44:42Z

Per Bridge, AASHTO M171 replaced with ASTM C 171 (since the former no longer exists).

← Older revision		Revision as of 14:44, 27 October 2011
Line 11:		Line 11:
	Original test data and calculations on liquid membrane-forming compounds shall be recorded in Laboratory workbooks. Test results shall be recorded through SiteManager for the appropriate type.		Original test data and calculations on liquid membrane-forming compounds shall be recorded in Laboratory workbooks. Test results shall be recorded through SiteManager for the appropriate type.

	Waterproof paper shall be tested for Moisture Loss and Tensile Strength in accordance with the methods set forth in ~~AASHTO M171~~.		Waterproof paper shall be tested for Moisture Loss and Tensile Strength in accordance with the methods set forth in ASTM C 171.

	White polyethylene sheeting for curing portland cement concrete shall be tested for moisture loss, thickness, tensile strength, and elongation in accordance with the methods set forth in ~~AASHTO M171~~ or PS 17-69 as applicable.		White polyethylene sheeting for curing portland cement concrete shall be tested for moisture loss, thickness, tensile strength, and elongation in accordance with the methods set forth in ASTM C 171 or PS 17-69 as applicable.

	===1055.4.2 Sample Report===		===1055.4.2 Sample Report===

Smithk: /* 1055.4.2 Sample Report */ Per CM, updated link to AS 3510

2011-07-06T12:28:46Z

1055.4.2 Sample Report: Per CM, updated link to AS 3510

← Older revision		Revision as of 07:28, 6 July 2011
Line 16:		Line 16:

	===1055.4.2 Sample Report===		===1055.4.2 Sample Report===
	The sample record shall be completed in SiteManager, as described in [http://~~wwwi~~/~~intranet~~/cm/~~materials~~/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[:category: 106 Control of Material#Reporting Test Results\|Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [http://contribute.modot.mo.gov/business/materials/pdf/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[:category: 106 Control of Material#Reporting Test Results\|Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

	[[Category:1055 Concrete Curing Material]]		[[Category:1055 Concrete Curing Material]]

Smithk: article construction

2008-02-21T16:05:34Z

article construction

← Older revision		Revision as of 11:05, 21 February 2008
Line 16:		Line 16:

	===1055.4.2 Sample Report===		===1055.4.2 Sample Report===
	The sample record shall be completed in SiteManager, as described in [[Automation ~~Sec~~ 3510]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[:category: 106 Control of Material#Reporting Test Results\|Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[:category: 106 Control of Material#Reporting Test Results\|Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

	[[Category:1055 Concrete Curing Material]]		[[Category:1055 Concrete Curing Material]]

Smithk: moved from 1055

2007-09-07T15:25:45Z

moved from 1055

New page

This article establishes procedures for Laboratory testing, approving and reporting Type l-D and Type 2 Class A liquid membrane-forming compounds, waterproof paper and white polyethylene sheeting suitable for curing portland cement concrete. Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec1055.pdf Sec 1055] for MoDOT’s specifications.

===1055.4.1 Procedure===

Preliminary Laboratory approval for Type l-D or Type 2 Class A liquid membrane-forming compounds is based on the following procedure:
:(a) Manufacturer shall furnish a one-quart (one liter) sample. Laboratory tests on this sample shall be as set forth in AASHTO M148.
:(b) Manufacturer shall furnish certification and guarantee for a Type 2 Class A white pigmented curing compound as required in [http://www.modot.mo.gov/business/standards_and_specs/Sec1055.pdf Sec 1055.2.1].
:(c) Upon completion of Laboratory tests and receipt of satisfactory manufacturer's certification, the supplier will be notified by letter whether the material is approved for use. Each approved brand and the manufacturer will be added to [http://www.modot.mo.gov/business/materials/pdf/PAL/concrete%20curing%20material.pdf Concrete Curing Material Pre-Acceptance List].
Samples from each lot of Type l-D - clear or transparent, or Type 2 Class A - white pigmented, materials destined for MoDOT projects shall be tested according to methods set forth in AASHTO M148. Reflectance tests shall be determined by the manufacturer in accordance with AASHTO M148 and furnished to the Department in compliance with [http://www.modot.mo.gov/business/standards_and_specs/Sec1055.pdf Sec 1055.2.1].

Original test data and calculations on liquid membrane-forming compounds shall be recorded in Laboratory workbooks. Test results shall be recorded through SiteManager for the appropriate type.

Waterproof paper shall be tested for Moisture Loss and Tensile Strength in accordance with the methods set forth in AASHTO M171.

White polyethylene sheeting for curing portland cement concrete shall be tested for moisture loss, thickness, tensile strength, and elongation in accordance with the methods set forth in AASHTO M171 or PS 17-69 as applicable.

===1055.4.2 Sample Report===
The sample record shall be completed in SiteManager, as described in [[Automation Sec 3510]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[:category: 106 Control of Material#Reporting Test Results|Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

[[Category:1055 Concrete Curing Material]]