237.14 Electronic Design Data Delivery (BIM Deliverables) - Revision history

Hoskir: /* 237.14.2.5 Civil Geometry File (alignments and profiles) */ updated link to video per email from Bill P.

2024-03-14T15:34:39Z

237.14.2.5 Civil Geometry File (alignments and profiles): updated link to video per email from Bill P.

← Older revision		Revision as of 10:34, 14 March 2024
Line 87:		Line 87:
	::* Open Roads Designer file (.dgn)		::* Open Roads Designer file (.dgn)
	::- LandXML (.xml)		::- LandXML (.xml)
	::- Access is available to the video [https://~~youtu~~.be/~~bPFTrdLcZFk~~ Creating the LandXML file (Geometry to XML CC)].		::- Access is available to the video [https://www.youtube.com/watch?v=ClDu_jg62T8&list=PLytGCrmgneuhcYekYDvJFtpHrZET1WiKp&index=20 Creating the LandXML file (Geometry to XML CC)].

	===237.14.2.6 Civil Geometry Report===		===237.14.2.6 Civil Geometry Report===

Hoskir: removed sentence with Power GeoPak

2024-01-16T15:38:51Z

removed sentence with Power GeoPak

← Older revision		Revision as of 10:38, 16 January 2024
Line 1:		Line 1:
	[[image:237.14.jpg\|right\|180px\|thumb\|<center>'''Operator using GPS grading'''</center>]]		[[image:237.14.jpg\|right\|180px\|thumb\|<center>'''Operator using GPS grading'''</center>]]
	MoDOT requires the use of Bentley Open Roads Designer (ORD) software for highway and bridge design. ~~Projects currently designed with SS4 or SS10 Power GEOPAK will be accepted until January 1, 2023. Open Roads~~ Designer is based on a 3D workflow. Throughout the entire project design, MoDOT Design staff and design consultants shall produce Electronic Design Data using Bentley’s Open Roads Designer as defined in this article. Any conversion process from another CADD package to Open Roads Designer Electronic Design Data is not acceptable. Please refer to [[#237.14.5 Glossary of Terms\|EPG 237.14.5 Glossary of Terms]] for the MoDOT definition of ''italicized terms'' as they apply to this document and the delivery of Electronic Design Data for MoDOT projects. Electronic Design Data requirements pertain to road design, bridge design and survey projects. These electronic deliverables are now referred to as Electronic Design Data (EDD). A subset of this information is then posted on the MoDOT [http://www.modot.org/business/contractor_resources/bid_opening_info/OpenLetting.shtml ''Online Plan Room''] for use by potential bidders. Contractors and utility companies that do not have Open Roads Designer (ORD) software can utilize the [https://www.bentley.com/en/products/product-line/modeling-and-visualization-software/bentley-view Bentley View Connect Edition] to review native .dgn files included in the Electronic Design Data.		MoDOT requires the use of Bentley Open Roads Designer (ORD) software for highway and bridge design. OpenRoads Designer is based on a 3D workflow. Throughout the entire project design, MoDOT Design staff and design consultants shall produce Electronic Design Data using Bentley’s Open Roads Designer as defined in this article. Any conversion process from another CADD package to Open Roads Designer Electronic Design Data is not acceptable. Please refer to [[#237.14.5 Glossary of Terms\|EPG 237.14.5 Glossary of Terms]] for the MoDOT definition of ''italicized terms'' as they apply to this document and the delivery of Electronic Design Data for MoDOT projects. Electronic Design Data requirements pertain to road design, bridge design and survey projects. These electronic deliverables are now referred to as Electronic Design Data (EDD). A subset of this information is then posted on the MoDOT [http://www.modot.org/business/contractor_resources/bid_opening_info/OpenLetting.shtml ''Online Plan Room''] for use by potential bidders. Contractors and utility companies that do not have Open Roads Designer (ORD) software can utilize the [https://www.bentley.com/en/products/product-line/modeling-and-visualization-software/bentley-view Bentley View Connect Edition] to review native .dgn files included in the Electronic Design Data.

	==237.14.1 MoDOT and Consultant Electronic Design Data Requirements==		==237.14.1 MoDOT and Consultant Electronic Design Data Requirements==

Hoskir: /* 237.14.2.5 Civil Geometry File (alignments and profiles) */ updated per email from K Vollet

2023-06-15T19:40:53Z

237.14.2.5 Civil Geometry File (alignments and profiles): updated per email from K Vollet

← Older revision		Revision as of 14:40, 15 June 2023
Line 82:		Line 82:

	===237.14.2.5 Civil Geometry File (alignments and profiles)===		===237.14.2.5 Civil Geometry File (alignments and profiles)===
	The Civil Geometry File, prepared by the designer, contains all ''horizontal and vertical alignments'' used in the development of the design. Horizontal alignment examples include: ''baselines'', ''special ditches'', etc. Vertical alignments include: baseline profiles, special ditch profiles, retaining wall profiles, etc. The Civil Geometry File should not contain any preliminary or unused alignments. All geometry contained in this file shall follow the [[media:237.14.2.5_MoDOT_Linear_Feature_Naming_Convention.pdf\|file naming convention for the designed Linear Features]] (i.e. Alignments and Profiles) found in the plans. A summary of all geometry shall be captured in the Civil Geometry Report.		The Civil Geometry File, prepared by the designer, contains all ''horizontal and vertical alignments'' used in the development of the design. Horizontal alignment examples include: ''baselines'', ''special ditches'', etc. Vertical alignments include: baseline profiles, special ditch profiles, retaining wall profiles, etc. The Civil Geometry File should not contain any preliminary or unused alignments. All geometry contained in this file shall follow the [[media:237.14.2.5_MoDOT_Linear_Feature_Naming_Convention.pdf\|file naming convention for the designed Linear Features]] (i.e. Alignments and Profiles) found in the plans. A summary of all geometry shall be captured in the Civil Geometry Report. To access this Open Roads Designer report, first select the Open Roads Modeling Workflow > Geometry Tab > General Tools > Reports Pulldown > Horizontal Geometry Report. Then select the Horizontal Alignment Review Report.

	The Civil Geometry File shall be provided in both of the following formats:		The Civil Geometry File shall be provided in both of the following formats:
	:* Open Roads Designer file (.dgn)		::* Open Roads Designer file (.dgn)
	:::- LandXML (.xml)		::- LandXML (.xml)
	::: - Access is available to the video [https://youtu.be/bPFTrdLcZFk Creating the LandXML file (Geometry to XML CC)].		::- Access is available to the video [https://youtu.be/bPFTrdLcZFk Creating the LandXML file (Geometry to XML CC)].

	===237.14.2.6 Civil Geometry Report===		===237.14.2.6 Civil Geometry Report===

Smithk at 19:24, 24 June 2022

2022-06-24T19:24:39Z

← Older revision		Revision as of 14:24, 24 June 2022
Line 1:		Line 1:
	[[image:237.14.jpg\|right\|180px\|thumb\|<center>'''Operator using GPS grading'''</center>]]		[[image:237.14.jpg\|right\|180px\|thumb\|<center>'''Operator using GPS grading'''</center>]]
	MoDOT requires the use of Bentley Open Roads Designer (ORD) software for highway and bridge design. Projects currently designed with SS4 or SS10 Power GEOPAK will be accepted until January 1, 2023. Open Roads Designer is based on a 3D workflow. Throughout the entire project design, MoDOT Design staff and design consultants shall produce Electronic Design Data using Bentley’s Open Roads Designer as defined in this ~~section~~. Any conversion process from another CADD package to Open Roads Designer Electronic Design Data is not acceptable. Please refer to [[#237.14.5 Glossary of Terms\|EPG 237.14.5 Glossary of Terms]] for the MoDOT definition of ''italicized terms'' as they apply to this document and the delivery of Electronic Design Data for MoDOT projects. Electronic Design Data requirements pertain to road design, bridge design and survey projects. These electronic deliverables are now referred to as Electronic Design Data (EDD). A subset of this information is then posted on the MoDOT [http://www.modot.org/business/contractor_resources/bid_opening_info/OpenLetting.shtml ''Online Plan Room''] for use by potential bidders. Contractors and utility companies that do not have Open Roads Designer (ORD) software can utilize the [https://www.bentley.com/en/products/product-line/modeling-and-visualization-software/bentley-view Bentley View Connect Edition] to review native .dgn files included in the Electronic Design Data.		MoDOT requires the use of Bentley Open Roads Designer (ORD) software for highway and bridge design. Projects currently designed with SS4 or SS10 Power GEOPAK will be accepted until January 1, 2023. Open Roads Designer is based on a 3D workflow. Throughout the entire project design, MoDOT Design staff and design consultants shall produce Electronic Design Data using Bentley’s Open Roads Designer as defined in this article. Any conversion process from another CADD package to Open Roads Designer Electronic Design Data is not acceptable. Please refer to [[#237.14.5 Glossary of Terms\|EPG 237.14.5 Glossary of Terms]] for the MoDOT definition of ''italicized terms'' as they apply to this document and the delivery of Electronic Design Data for MoDOT projects. Electronic Design Data requirements pertain to road design, bridge design and survey projects. These electronic deliverables are now referred to as Electronic Design Data (EDD). A subset of this information is then posted on the MoDOT [http://www.modot.org/business/contractor_resources/bid_opening_info/OpenLetting.shtml ''Online Plan Room''] for use by potential bidders. Contractors and utility companies that do not have Open Roads Designer (ORD) software can utilize the [https://www.bentley.com/en/products/product-line/modeling-and-visualization-software/bentley-view Bentley View Connect Edition] to review native .dgn files included in the Electronic Design Data.

	==237.14.1 MoDOT and Consultant Electronic Design Data Requirements==		==237.14.1 MoDOT and Consultant Electronic Design Data Requirements==

Smithk: /* 237.14.2.4 Survey (.dgn) file */ Per CADD, updated broken link

2022-04-28T12:30:01Z

237.14.2.4 Survey (.dgn) file: Per CADD, updated broken link

← Older revision		Revision as of 07:30, 28 April 2022
Line 77:		Line 77:
	:* Open Roads Designer file (.dgn)		:* Open Roads Designer file (.dgn)
	:* LandXML<sup>'''1'''</sup> (.xml)		:* LandXML<sup>'''1'''</sup> (.xml)
	::: - Access is available to the video [~~[media~~:~~237~~.~~14.2.4_Exporting_Existing_Ground_Terrain_To_LandXML.wmv\|~~Creating the LandXML File (Exporting Existing Ground Terrain To LandXML)]].		::: - Access is available to the video [https://youtu.be/hnolz7ZIAvo Creating the LandXML File (Exporting Existing Ground Terrain To LandXML)].

	:<sup>'''1'''</sup> '' MoDOT utilizes ''LiDAR'' to capture existing conditions; these are large files and may exceed the limit of LandXML file creation. If the file size is too large to export via LandXML 1.2, the existing ground surface must be broken into multiple sections. Please contact CADD Support for additional information.''		:<sup>'''1'''</sup> '' MoDOT utilizes ''LiDAR'' to capture existing conditions; these are large files and may exceed the limit of LandXML file creation. If the file size is too large to export via LandXML 1.2, the existing ground surface must be broken into multiple sections. Please contact CADD Support for additional information.''

Smithk: /* 237.14.2.4 Survey (.dgn) file */ Per CADD, updated broken link

2022-04-28T12:13:47Z

237.14.2.4 Survey (.dgn) file: Per CADD, updated broken link

← Older revision		Revision as of 07:13, 28 April 2022
Line 77:		Line 77:
	:* Open Roads Designer file (.dgn)		:* Open Roads Designer file (.dgn)
	:* LandXML<sup>'''1'''</sup> (.xml)		:* LandXML<sup>'''1'''</sup> (.xml)
	::: - Access is available to the video [~~https~~:~~//design~~.~~modot~~.mo.~~gov/CADD/BentleyCivil/Terrain_Modeling/Exporting_Existing_Ground_Terrain_To_LandXML~~.wmv Creating the LandXML File (Exporting Existing Ground Terrain To LandXML)] .		::: - Access is available to the video [[media:237.14.2.4_Exporting_Existing_Ground_Terrain_To_LandXML.wmv\|Creating the LandXML File (Exporting Existing Ground Terrain To LandXML)]].

	:<sup>'''1'''</sup> '' MoDOT utilizes ''LiDAR'' to capture existing conditions; these are large files and may exceed the limit of LandXML file creation. If the file size is too large to export via LandXML 1.2, the existing ground surface must be broken into multiple sections. Please contact CADD Support for additional information.''		:<sup>'''1'''</sup> '' MoDOT utilizes ''LiDAR'' to capture existing conditions; these are large files and may exceed the limit of LandXML file creation. If the file size is too large to export via LandXML 1.2, the existing ground surface must be broken into multiple sections. Please contact CADD Support for additional information.''

Smithk: Per CADD, updated broken links

2022-04-27T20:23:21Z

Per CADD, updated broken links

← Older revision		Revision as of 15:23, 27 April 2022
Line 87:		Line 87:
	:* Open Roads Designer file (.dgn)		:* Open Roads Designer file (.dgn)
	:::- LandXML (.xml)		:::- LandXML (.xml)
	::: - Access is available to the video [~~[media~~:~~237~~.~~14.2.5_Geometry-to-XML_CC.wmv\|~~Creating the LandXML file (Geometry to XML CC)]].		::: - Access is available to the video [https://youtu.be/bPFTrdLcZFk Creating the LandXML file (Geometry to XML CC)].

	===237.14.2.6 Civil Geometry Report===		===237.14.2.6 Civil Geometry Report===
	The [[media:237.14.2.6_Civil_Geometry_Report.xlsx\|Civil Geometry Report]], prepared by the designer, can be produced by using the style sheet report “MoDOTHorizontalandVerticalAlignmentReviewReport.xsl”. This report is available in the MoDOT Open Roads Designer ''workspace''. The Civil Geometry Report shall include all horizontal and vertical alignments that make up the project. (For example: roadway baselines and profiles, radius returns, special ditches, etc.).		The [[media:237.14.2.6_Civil_Geometry_Report.xlsx\|Civil Geometry Report]], prepared by the designer, can be produced by using the style sheet report “MoDOTHorizontalandVerticalAlignmentReviewReport.xsl”. This report is available in the MoDOT Open Roads Designer ''workspace''. The Civil Geometry Report shall include all horizontal and vertical alignments that make up the project. (For example: roadway baselines and profiles, radius returns, special ditches, etc.).

	Access is available to the video, [~~[media~~:~~237~~.~~14.2.6_Electronic_Delieverables_H_V_Report_CC.wmv\|~~Creating the Civil Geometry Report]], that shows the steps to assemble a Civil Geometry Report.		Access is available to the video, [https://youtu.be/QJw6JuVVaLs Creating the Civil Geometry Report], that shows the steps to assemble a Civil Geometry Report.

	The Civil Geometry Report shall be provided in either of the following formats:		The Civil Geometry Report shall be provided in either of the following formats:
Line 114:		Line 114:
	[[image:237.14.2.8.jpg\|center\|650px\|thumb\|<center>'''Example of Proposed Terrain Model'''</center>]]		[[image:237.14.2.8.jpg\|center\|650px\|thumb\|<center>'''Example of Proposed Terrain Model'''</center>]]

	Access is available to the video [~~[media~~:~~237~~.~~14.2.8_Using_MoDOT_Graphic_Filters.wmv\|~~Creating the Design - Proposed Finished Grade Terrain Model]].		Access is available to the video [https://youtu.be/A6ybnipMwIk Creating the Design - Proposed Finished Grade Terrain Model].

	The Proposed Terrain Model shall be submitted in the following formats (when applicable based on type of project):		The Proposed Terrain Model shall be submitted in the following formats (when applicable based on type of project):
	:* Open Roads Designer file (.dgn)		:* Open Roads Designer file (.dgn)
	:* ssLandXML file (.xml)		:* ssLandXML file (.xml)
	:::- Access is available to the video [~~[media~~:~~237~~.~~14.2.8_Exporting_Proposed_Ground_Terrain_To_LandXML.wmv\|~~Creating the LandXML file]].		:::- Access is available to the video [https://youtu.be/mdkvE1u2-Tw Creating the LandXML file].

	===237.14.2.9 Proposed 3D Top Surface Linear Features===		===237.14.2.9 Proposed 3D Top Surface Linear Features===
Line 131:		Line 131:
	'''Example of 3D Linear Features'''		'''Example of 3D Linear Features'''
	</center>		</center>
	:* The instructional video, [~~[media~~:~~237~~.~~14.2.9_final_linear_Features.mp4\|~~Creating the Design – Proposed Corridor 3D Linear Features]], is available.		:* The instructional video, [https://youtu.be/o0BBPKsEzqQ Creating the Design – Proposed Corridor 3D Linear Features], is available.

	The Proposed 3D Linear Features shall be submitted in the following format (when applicable based on type of project):		The Proposed 3D Linear Features shall be submitted in the following format (when applicable based on type of project):

Smithk: Per CADD, updated numerous broken links

2022-04-27T16:10:05Z

Per CADD, updated numerous broken links

Show changes

Kleins1: /* 237.14.2.2 Survey Report */ Survey_Report.pdf and Survey_Report_Example.pdf were uploaded directly into the EPG due to a broken SP link.

2022-04-22T18:02:57Z

237.14.2.2 Survey Report: Survey_Report.pdf and Survey_Report_Example.pdf were uploaded directly into the EPG due to a broken SP link.

← Older revision		Revision as of 13:02, 22 April 2022
Line 55:		Line 55:

	===237.14.2.2 Survey Report ===		===237.14.2.2 Survey Report ===
	The [~~https~~:~~//design.modot.mo.gov/CADD/Files/Electronic_Design_Data/~~Survey_Report.pdf Survey Report] is prepared by the project’s ''Professional Land Surveyor of Record''. It is used for documenting the ''project control'' metadata and the method in which the ''topography'' and terrain information is obtained for a project.		The [[media: Survey_Report.pdf\| Survey Report]] is prepared by the project’s ''Professional Land Surveyor of Record''. It is used for documenting the ''project control'' metadata and the method in which the ''topography'' and terrain information is obtained for a project.

	A [~~https~~:~~//design.modot.mo.gov/CADD/Files/Electronic_Design_Data/~~Survey_Report_Example.pdf Survey Report Example] is available.		A [[media: Survey_Report_Example.pdf\| Survey Report Example]] is available.

	The Survey Report shall be provided as a Adobe Acrobat file (.PDF).		The Survey Report shall be provided as a Adobe Acrobat file (.PDF).

Smithk: Per CADD, minor corrections and clarification

2022-02-01T19:09:43Z

Per CADD, minor corrections and clarification

← Older revision		Revision as of 14:09, 1 February 2022
Line 1:		Line 1:
	[[image:237.14.jpg\|right\|180px\|thumb\|<center>'''Operator using GPS grading'''</center>]]		[[image:237.14.jpg\|right\|180px\|thumb\|<center>'''Operator using GPS grading'''</center>]]
	MoDOT requires the use of Bentley Open Roads Designer (ORD) software for highway and bridge design. Projects currently designed with SS4 or SS10 Power GEOPAK will be accepted until January 1, 2023. Open Roads Designer is based on a 3D workflow. Throughout the entire project design, MoDOT Design staff and design consultants shall produce Electronic Design Data using Bentley’s Open Roads Designer as defined in this section. Any conversion process from another CADD package to Open Roads Designer Electronic Design Data is not acceptable. Please refer to [[#237.14.5 Glossary of Terms\|EPG 237.14.5 Glossary of Terms]] for the MoDOT definition of ''italicized terms'' as they apply to this document and the delivery of Electronic Design Data for MoDOT projects. Electronic Design Data requirements pertain to road design, bridge design and survey projects. These electronic deliverables are now referred to as Electronic Design Data (EDD). A subset of this information is then posted on the MoDOT [http://www.modot.org/business/contractor_resources/bid_opening_info/OpenLetting.shtml ''Online Plan Room''] for use by potential bidders. Contractors and ~~utilities~~ that do not have Open Roads Designer (ORD) software can utilize the [https://www.bentley.com/en/products/product-line/modeling-and-visualization-software/bentley-view Bentley View Connect Edition] to review native .dgn files included in the Electronic Design Data.		MoDOT requires the use of Bentley Open Roads Designer (ORD) software for highway and bridge design. Projects currently designed with SS4 or SS10 Power GEOPAK will be accepted until January 1, 2023. Open Roads Designer is based on a 3D workflow. Throughout the entire project design, MoDOT Design staff and design consultants shall produce Electronic Design Data using Bentley’s Open Roads Designer as defined in this section. Any conversion process from another CADD package to Open Roads Designer Electronic Design Data is not acceptable. Please refer to [[#237.14.5 Glossary of Terms\|EPG 237.14.5 Glossary of Terms]] for the MoDOT definition of ''italicized terms'' as they apply to this document and the delivery of Electronic Design Data for MoDOT projects. Electronic Design Data requirements pertain to road design, bridge design and survey projects. These electronic deliverables are now referred to as Electronic Design Data (EDD). A subset of this information is then posted on the MoDOT [http://www.modot.org/business/contractor_resources/bid_opening_info/OpenLetting.shtml ''Online Plan Room''] for use by potential bidders. Contractors and utility companies that do not have Open Roads Designer (ORD) software can utilize the [https://www.bentley.com/en/products/product-line/modeling-and-visualization-software/bentley-view Bentley View Connect Edition] to review native .dgn files included in the Electronic Design Data.

	==237.14.1 MoDOT and Consultant Electronic Design Data Requirements==		==237.14.1 MoDOT and Consultant Electronic Design Data Requirements==
Line 75:		Line 75:

	The existing terrain model shall be submitted in the following formats:		The existing terrain model shall be submitted in the following formats:
	:* ~~Power GEOAPK~~ file (.dgn)		:* Open Roads Designer file (.dgn)
	:* LandXML<sup>'''1'''</sup> (.xml)		:* LandXML<sup>'''1'''</sup> (.xml)
	::: - Access is available to the video [https://design.modot.mo.gov/CADD/BentleyCivil/Terrain_Modeling/Exporting_Existing_Ground_Terrain_To_LandXML.wmv Creating the LandXML File (Exporting Existing Ground Terrain To LandXML)] .		::: - Access is available to the video [https://design.modot.mo.gov/CADD/BentleyCivil/Terrain_Modeling/Exporting_Existing_Ground_Terrain_To_LandXML.wmv Creating the LandXML File (Exporting Existing Ground Terrain To LandXML)] .
Line 289:		Line 289:
	'''Baseline.''' A baseline is an alignment that is established for the design of road. A baseline is assigned stationing and contains no vertical information. The existing baseline shall be established by the PLS of record. Proposed baselines are usually established by the design engineer of record.		'''Baseline.''' A baseline is an alignment that is established for the design of road. A baseline is assigned stationing and contains no vertical information. The existing baseline shall be established by the PLS of record. Proposed baselines are usually established by the design engineer of record.

	'''Bentley.''' The company that produces MoDOT's roadway design software. Products include: ~~Power GEOAPK~~, ProjectWise and ConceptStation.		'''Bentley.''' The company that produces MoDOT's roadway design software. Products include: Open Roads Designer, ProjectWise and ConceptStation.

	'''Berm.''' A raised earth barrier separating two areas		'''Berm.''' A raised earth barrier separating two areas