620.10 Rumble Strip Markings (MUTCD Chapter 3K) - Revision history

RollerA: /* {{SpanID|620.10.1}}620.10.1 Longitudinal Rumble Strip Markings (MUTCD Section 3K.01) */

2025-11-25T16:49:15Z

{{SpanID|620.10.1}}620.10.1 Longitudinal Rumble Strip Markings (MUTCD Section 3K.01)

← Older revision		Revision as of 11:49, 25 November 2025
Line 3:		Line 3:

	{{SpanID\|fig3k1}}		{{SpanID\|fig3k1}}
	[[File:~~Fig3K-1_ExamplesOfLongitudinalRumbleStripMarkings~~.png\|thumb\|center\|800px\|alt="A: A segment of a horizontal two-lane roadway is shown with one lane of travel in each direction. A series of closely spaced rectangles representing a rumble strip are shown superimposed on each white edge line.		[[File:Figure 620.10.1 Examples of Longitudinal Rumble Strip Markings.png\|thumb\|center\|800px\|alt="A: A segment of a horizontal two-lane roadway is shown with one lane of travel in each direction. A series of closely spaced rectangles representing a rumble strip are shown superimposed on each white edge line.
	B: A segment of a horizontal two-lane roadway is shown with one lane of travel in each direction. A series of closely spaced rectangles representing a rumble strip are shown superimposed on the double-yellow center line."		B: A segment of a horizontal two-lane roadway is shown with one lane of travel in each direction. A series of closely spaced rectangles representing a rumble strip are shown superimposed on the double-yellow center line."
	\|'''Figure 620.10.1''' Examples of Longitudinal Rumble Strip Markings]]		\|'''Figure 620.10.1''' Examples of Longitudinal Rumble Strip Markings]]

WilkeJ: /* {{SpanID|620.10.1}}620.10.1 Longitudinal Rumble Strip Markings (MUTCD Section 3K.01) */

2025-11-13T17:45:48Z

{{SpanID|620.10.1}}620.10.1 Longitudinal Rumble Strip Markings (MUTCD Section 3K.01)

← Older revision		Revision as of 12:45, 13 November 2025
Line 8:		Line 8:


	'''Support. '''Longitudinal rumble strips consist of a series of rough-textured or slightly raised or depressed road surfaces intended to alert inattentive drivers through vibration and sound that their vehicle has left the travel lane. Shoulder rumble strips are typically installed along the shoulder near the travel lane. On divided highways, rumble strips are sometimes installed on the median side (left-hand side) shoulder as well as on the outside (right-hand side) shoulder. On two-way roadways, rumble strips are sometimes installed along the center line.		'''Support. '''Longitudinal rumble strips consist of a series of rough-textured or slightly raised or depressed road surfaces intended to alert inattentive drivers through vibration and sound that their vehicle has left the travel lane. Shoulder rumble strips are typically installed along the shoulder near the travel lane. On divided highways, rumble strips are sometimes installed on the median side (left-hand side) shoulder as well as on the outside (right-hand side) shoulder. On two-way roadways, rumble strips are sometimes installed along the center line. See [https://www.modot.org/media/16896 Standard Plan 620] for details.

	[[:Category:620 Pavement Marking (MUTCD Part 3)\|EPG 620]] contains no provisions regarding the design and placement of longitudinal rumble strips. The provisions in [[#620.10.1\|EPG 620.10.1]] address the use of markings in combination with a longitudinal rumble strip. [[#fig3k1\|Figure 620.10.1]] illustrates markings used with or near longitudinal rumble strips.		[[:Category:620 Pavement Marking (MUTCD Part 3)\|EPG 620]] contains no provisions regarding the design and placement of longitudinal rumble strips. The provisions in [[#620.10.1\|EPG 620.10.1]] address the use of markings in combination with a longitudinal rumble strip. [[#fig3k1\|Figure 620.10.1]] illustrates markings used with or near longitudinal rumble strips.

HogsettC: /* {{SpanID|620.10.1}}620.10.1 Longitudinal Rumble Strip Markings (MUTCD Section 3K.01) */

2025-10-29T15:11:37Z

{{SpanID|620.10.1}}620.10.1 Longitudinal Rumble Strip Markings (MUTCD Section 3K.01)

← Older revision		Revision as of 10:11, 29 October 2025
Line 3:		Line 3:

	{{SpanID\|fig3k1}}		{{SpanID\|fig3k1}}
	[[File:Fig3K-1_ExamplesOfLongitudinalRumbleStripMarkings.png\|thumb\|center\|800px\|alt=\|'''Figure 620.10.1''' Examples of Longitudinal Rumble Strip Markings]]		[[File:Fig3K-1_ExamplesOfLongitudinalRumbleStripMarkings.png\|thumb\|center\|800px\|alt="A: A segment of a horizontal two-lane roadway is shown with one lane of travel in each direction. A series of closely spaced rectangles representing a rumble strip are shown superimposed on each white edge line.
			B: A segment of a horizontal two-lane roadway is shown with one lane of travel in each direction. A series of closely spaced rectangles representing a rumble strip are shown superimposed on the double-yellow center line."
			\|'''Figure 620.10.1''' Examples of Longitudinal Rumble Strip Markings]]

HogsettC: /* {{SpanID|620.10.2}}620.10.2 Transverse Rumble Strip Markings (MUTCD Section 3K.02) */

2025-10-24T13:09:19Z

{{SpanID|620.10.2}}620.10.2 Transverse Rumble Strip Markings (MUTCD Section 3K.02)

← Older revision		Revision as of 08:09, 24 October 2025
Line 22:		Line 22:
	[[:Category:620 Pavement Marking (MUTCD Part 3)\|EPG 620]] contains no provisions regarding the design and placement of transverse rumble strips that approximate the color of the pavement. The provisions in [[#620.10.2\|EPG 620.10.2]] address the use of markings in combination with a transverse rumble strip.		[[:Category:620 Pavement Marking (MUTCD Part 3)\|EPG 620]] contains no provisions regarding the design and placement of transverse rumble strips that approximate the color of the pavement. The provisions in [[#620.10.2\|EPG 620.10.2]] address the use of markings in combination with a transverse rumble strip.

	[[~~:Category:~~626 Rumble Strips #626.4 \|EPG 626.4]] contains information related to transverse rumble strips.		[[626.4 Transverse Rumble Strips #626.4 \|EPG 626.4]] contains information related to transverse rumble strips.

	'''Standard. '''Except as otherwise provided in [[~~:Category:~~626 Rumble Strips #626.4 \|EPG 626.4]] for TTC zones, if the color of a transverse rumble strip used within a travel lane is not the color of the pavement, the color of the transverse rumble strip shall be either black or white.		'''Standard. '''Except as otherwise provided in [[626.4 Transverse Rumble Strips #626.4 \|EPG 626.4]] for TTC zones, if the color of a transverse rumble strip used within a travel lane is not the color of the pavement, the color of the transverse rumble strip shall be either black or white.

	'''Guidance. '''White transverse rumble strip markings used in a travel lane should not be placed in locations where they could be confused with other transverse markings such as stop lines or crosswalks.		'''Guidance. '''White transverse rumble strip markings used in a travel lane should not be placed in locations where they could be confused with other transverse markings such as stop lines or crosswalks.

HogsettC: /* {{SpanID|620.10.2}}620.10.2 Transverse Rumble Strip Markings (MUTCD Section 3K.02) */

2025-10-24T13:08:35Z

{{SpanID|620.10.2}}620.10.2 Transverse Rumble Strip Markings (MUTCD Section 3K.02)

← Older revision		Revision as of 08:08, 24 October 2025
Line 22:		Line 22:
	[[:Category:620 Pavement Marking (MUTCD Part 3)\|EPG 620]] contains no provisions regarding the design and placement of transverse rumble strips that approximate the color of the pavement. The provisions in [[#620.10.2\|EPG 620.10.2]] address the use of markings in combination with a transverse rumble strip.		[[:Category:620 Pavement Marking (MUTCD Part 3)\|EPG 620]] contains no provisions regarding the design and placement of transverse rumble strips that approximate the color of the pavement. The provisions in [[#620.10.2\|EPG 620.10.2]] address the use of markings in combination with a transverse rumble strip.

	~~MUTCD Section 6M~~.06 contains information related to transverse rumble strips.		[[:Category:626 Rumble Strips #626.4 \|EPG 626.4]] contains information related to transverse rumble strips.

	'''Standard. '''Except as otherwise provided in ~~MUTCD Section 6M~~.06 for TTC zones, if the color of a transverse rumble strip used within a travel lane is not the color of the pavement, the color of the transverse rumble strip shall be either black or white.		'''Standard. '''Except as otherwise provided in [[:Category:626 Rumble Strips #626.4 \|EPG 626.4]] for TTC zones, if the color of a transverse rumble strip used within a travel lane is not the color of the pavement, the color of the transverse rumble strip shall be either black or white.

	'''Guidance. '''White transverse rumble strip markings used in a travel lane should not be placed in locations where they could be confused with other transverse markings such as stop lines or crosswalks.		'''Guidance. '''White transverse rumble strip markings used in a travel lane should not be placed in locations where they could be confused with other transverse markings such as stop lines or crosswalks.

HogsettC: /* {{SpanID|620.10.1}}620.10.1 Longitudinal Rumble Strip Markings (MUTCD Section 3K.01) */

2025-10-24T13:06:30Z

{{SpanID|620.10.1}}620.10.1 Longitudinal Rumble Strip Markings (MUTCD Section 3K.01)

← Older revision		Revision as of 08:06, 24 October 2025
Line 14:		Line 14:
	'''Standard. '''Where edge line or centerline rumble strips are required, as noted in [[:Category:626 Rumble Strips \|EPG 626]], the edge line or center line marking shall be located over the rumble strip to create a rumble stripe.		'''Standard. '''Where edge line or centerline rumble strips are required, as noted in [[:Category:626 Rumble Strips \|EPG 626]], the edge line or center line marking shall be located over the rumble strip to create a rumble stripe.

	~~'''Standard. '''~~The color of an edge line or center line associated with a longitudinal rumble stripe shall be in accordance with [[620.1 General (MUTCD Chapter 3A)#620.1.3\|EPG 620.1.3]].		The color of an edge line or center line associated with a longitudinal rumble stripe shall be in accordance with [[620.1 General (MUTCD Chapter 3A)#620.1.3\|EPG 620.1.3]].

	=={{SpanID\|620.10.2}}620.10.2 Transverse Rumble Strip Markings (MUTCD Section 3K.02) ==		=={{SpanID\|620.10.2}}620.10.2 Transverse Rumble Strip Markings (MUTCD Section 3K.02) ==

HogsettC: /* {{SpanID|620.10.1}}620.10.1 Longitudinal Rumble Strip Markings (MUTCD Section 3K.01) */

2025-10-24T13:06:13Z

{{SpanID|620.10.1}}620.10.1 Longitudinal Rumble Strip Markings (MUTCD Section 3K.01)

← Older revision		Revision as of 08:06, 24 October 2025
Line 9:		Line 9:

	[[:Category:620 Pavement Marking (MUTCD Part 3)\|EPG 620]] contains no provisions regarding the design and placement of longitudinal rumble strips. The provisions in [[#620.10.1\|EPG 620.10.1]] address the use of markings in combination with a longitudinal rumble strip. [[#fig3k1\|Figure 620.10.1]] illustrates markings used with or near longitudinal rumble strips.		[[:Category:620 Pavement Marking (MUTCD Part 3)\|EPG 620]] contains no provisions regarding the design and placement of longitudinal rumble strips. The provisions in [[#620.10.1\|EPG 620.10.1]] address the use of markings in combination with a longitudinal rumble strip. [[#fig3k1\|Figure 620.10.1]] illustrates markings used with or near longitudinal rumble strips.

	~~MUTCD Section 6M.06 contains information related to longitudinal rumble strips.~~

	Rumble strip markings provide notice to the driver that they are leaving their lane. They also provide increased visibility of the pavement markings during wet pavement conditions. Rumble strip markings are a system-wide safety improvement. Additional information on the use and application of rumble strip markings can be found in [[:Category:626 Rumble Strips \|EPG 626]].		Rumble strip markings provide notice to the driver that they are leaving their lane. They also provide increased visibility of the pavement markings during wet pavement conditions. Rumble strip markings are a system-wide safety improvement. Additional information on the use and application of rumble strip markings can be found in [[:Category:626 Rumble Strips \|EPG 626]].

HogsettC: /* {{SpanID|620.10.1}}620.10.1 Longitudinal Rumble Strip Markings (MUTCD Section 3K.01) */

2025-10-24T13:03:43Z

{{SpanID|620.10.1}}620.10.1 Longitudinal Rumble Strip Markings (MUTCD Section 3K.01)

← Older revision		Revision as of 08:03, 24 October 2025
Line 14:		Line 14:
	Rumble strip markings provide notice to the driver that they are leaving their lane. They also provide increased visibility of the pavement markings during wet pavement conditions. Rumble strip markings are a system-wide safety improvement. Additional information on the use and application of rumble strip markings can be found in [[:Category:626 Rumble Strips \|EPG 626]].		Rumble strip markings provide notice to the driver that they are leaving their lane. They also provide increased visibility of the pavement markings during wet pavement conditions. Rumble strip markings are a system-wide safety improvement. Additional information on the use and application of rumble strip markings can be found in [[:Category:626 Rumble Strips \|EPG 626]].

	'''Standard. '''Where edge line or centerline rumble strips are required, as noted in [[626 Rumble Strips\|EPG 626]], the edge line or center line marking shall be located over the rumble strip to create a rumble stripe.		'''Standard. '''Where edge line or centerline rumble strips are required, as noted in [[:Category:626 Rumble Strips \|EPG 626]], the edge line or center line marking shall be located over the rumble strip to create a rumble stripe.

	'''Standard. '''The color of an edge line or center line associated with a longitudinal rumble stripe shall be in accordance with [[620.1 General (MUTCD Chapter 3A)#620.1.3\|EPG 620.1.3]].		'''Standard. '''The color of an edge line or center line associated with a longitudinal rumble stripe shall be in accordance with [[620.1 General (MUTCD Chapter 3A)#620.1.3\|EPG 620.1.3]].

HogsettC: /* {{SpanID|620.10.1}}620.10.1 Longitudinal Rumble Strip Markings (MUTCD Section 3K.01) */

2025-10-24T13:03:10Z

{{SpanID|620.10.1}}620.10.1 Longitudinal Rumble Strip Markings (MUTCD Section 3K.01)

← Older revision		Revision as of 08:03, 24 October 2025
Line 12:		Line 12:
	MUTCD Section 6M.06 contains information related to longitudinal rumble strips.		MUTCD Section 6M.06 contains information related to longitudinal rumble strips.

	Rumble strip markings provide notice to the driver that they are leaving their lane. They also provide increased visibility of the pavement markings during wet pavement conditions. Rumble strip markings are a system-wide safety improvement. Additional information on the use and application of rumble strip markings can be found in [[626 Rumble Strips\|EPG 626]].		Rumble strip markings provide notice to the driver that they are leaving their lane. They also provide increased visibility of the pavement markings during wet pavement conditions. Rumble strip markings are a system-wide safety improvement. Additional information on the use and application of rumble strip markings can be found in [[:Category:626 Rumble Strips \|EPG 626]].

	'''Standard. '''Where edge line or centerline rumble strips are required, as noted in [[626 Rumble Strips\|EPG 626]], the edge line or center line marking shall be located over the rumble strip to create a rumble stripe.		'''Standard. '''Where edge line or centerline rumble strips are required, as noted in [[626 Rumble Strips\|EPG 626]], the edge line or center line marking shall be located over the rumble strip to create a rumble stripe.

TaracksA at 10:04, 23 October 2025

2025-10-23T10:04:24Z

← Older revision		Revision as of 05:04, 23 October 2025
Line 3:		Line 3:

	{{SpanID\|fig3k1}}		{{SpanID\|fig3k1}}
	[[File:Fig3K-1_ExamplesOfLongitudinalRumbleStripMarkings.~~jpg~~\|thumb\|center\|800px\|alt=\|'''Figure 620.10.1''' Examples of Longitudinal Rumble Strip Markings]]		[[File:Fig3K-1_ExamplesOfLongitudinalRumbleStripMarkings.png\|thumb\|center\|800px\|alt=\|'''Figure 620.10.1''' Examples of Longitudinal Rumble Strip Markings]]

← Older revision		Revision as of 08:06, 24 October 2025
Line 14:		Line 14:
	'''Standard. '''Where edge line or centerline rumble strips are required, as noted in [[:Category:626 Rumble Strips \|EPG 626]], the edge line or center line marking shall be located over the rumble strip to create a rumble stripe.		'''Standard. '''Where edge line or centerline rumble strips are required, as noted in [[:Category:626 Rumble Strips \|EPG 626]], the edge line or center line marking shall be located over the rumble strip to create a rumble stripe.

	~~'''Standard. '''~~The color of an edge line or center line associated with a longitudinal rumble stripe shall be in accordance with [[620.1 General (MUTCD Chapter 3A)#620.1.3\|EPG 620.1.3]].		The color of an edge line or center line associated with a longitudinal rumble stripe shall be in accordance with [[620.1 General (MUTCD Chapter 3A)#620.1.3\|EPG 620.1.3]].

	=={{SpanID\|620.10.2}}620.10.2 Transverse Rumble Strip Markings (MUTCD Section 3K.02) ==		=={{SpanID\|620.10.2}}620.10.2 Transverse Rumble Strip Markings (MUTCD Section 3K.02) ==

← Older revision		Revision as of 08:03, 24 October 2025
Line 14:		Line 14:
	Rumble strip markings provide notice to the driver that they are leaving their lane. They also provide increased visibility of the pavement markings during wet pavement conditions. Rumble strip markings are a system-wide safety improvement. Additional information on the use and application of rumble strip markings can be found in [[:Category:626 Rumble Strips \|EPG 626]].		Rumble strip markings provide notice to the driver that they are leaving their lane. They also provide increased visibility of the pavement markings during wet pavement conditions. Rumble strip markings are a system-wide safety improvement. Additional information on the use and application of rumble strip markings can be found in [[:Category:626 Rumble Strips \|EPG 626]].

	'''Standard. '''Where edge line or centerline rumble strips are required, as noted in [[626 Rumble Strips\|EPG 626]], the edge line or center line marking shall be located over the rumble strip to create a rumble stripe.		'''Standard. '''Where edge line or centerline rumble strips are required, as noted in [[:Category:626 Rumble Strips \|EPG 626]], the edge line or center line marking shall be located over the rumble strip to create a rumble stripe.

	'''Standard. '''The color of an edge line or center line associated with a longitudinal rumble stripe shall be in accordance with [[620.1 General (MUTCD Chapter 3A)#620.1.3\|EPG 620.1.3]].		'''Standard. '''The color of an edge line or center line associated with a longitudinal rumble stripe shall be in accordance with [[620.1 General (MUTCD Chapter 3A)#620.1.3\|EPG 620.1.3]].