Category:1057 Material for Joints - Revision history

Hoskir: /* 1057.2.3 Basis of Acceptance */ updated link to 106.12

2024-12-13T15:29:37Z

1057.2.3 Basis of Acceptance: updated link to 106.12

← Older revision		Revision as of 10:29, 13 December 2024
Line 25:		Line 25:

	===1057.2.3 Basis of Acceptance===		===1057.2.3 Basis of Acceptance===
	Material is accepted by the PAL criteria as indicated in [[106.~~12 Pre~~-~~Acceptance Lists~~ (PAL)\|EPG 106.12 Pre-Acceptance Lists (PAL)]]. Central Office Construction and Materials will retain the original certification and guarantee. Additional certification is not necessary if the manufacturer and brand of material is clearly identified on the packaging or the documentation included with the shipment.		Material is accepted by the PAL criteria as indicated in [[106.12_Qualified_Lists_(QL)_and_Pre-Acceptance_Lists_(PAL)\|EPG 106.12 Qualified Lists (QL) and Pre-Acceptance Lists (PAL)]]. Central Office Construction and Materials will retain the original certification and guarantee. Additional certification is not necessary if the manufacturer and brand of material is clearly identified on the packaging or the documentation included with the shipment.

	===1057.2.4 Sampling===		===1057.2.4 Sampling===

Smithk: Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

2021-10-18T13:57:14Z

Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

← Older revision		Revision as of 08:57, 18 October 2021
Line 82:		Line 82:
	==1057.3 Report (Records)==		==1057.3 Report (Records)==
	===1057.3.1 Samples===		===1057.3.1 Samples===
	Samples shall be recorded using ~~SiteManager~~ showing the manufacturer’s name, the brand name (as applicable), lot or heat number, net quantity represented, and the location where the sample was obtained using the Sampled From and Sample Origin fields of ~~SiteManager~~. If the material is sampled after having a PAL ID assigned to it, the “Link To” field should be used to link the two sample records in ~~SiteManager~~. Test results on random samples of material will be reported by the Central Laboratory.		Samples shall be recorded using AASHTOWARE Project (AWP) showing the manufacturer’s name, the brand name (as applicable), lot or heat number, net quantity represented, and the location where the sample was obtained using the Sampled From and Sample Origin fields of AWP. If the material is sampled after having a PAL ID assigned to it, the “Link To” field should be used to link the two sample records in AWP. Test results on random samples of material will be reported by the Central Laboratory.

	===1057.3.2 Supplier Notification===		===1057.3.2 Supplier Notification===

Smithk: /* 1057.2.1 Pre-Acceptance Lists */

2018-11-13T20:49:00Z

1057.2.1 Pre-Acceptance Lists

← Older revision		Revision as of 15:49, 13 November 2018
Line 19:		Line 19:
	==1057.2 Procedure==		==1057.2 Procedure==
	===1057.2.1 Pre-Acceptance Lists===		===1057.2.1 Pre-Acceptance Lists===
	Manufacturers and brand names (as applicable) of dowel bars, tie bars, hot pour elastic joint sealer, performed fiber expansion joint filler, plastic waterstop, rubber waterstop, copper sheeting for flashing, preformed sponge rubber expansion joint filler, plastic joint compound for pipe, and silicone sealant for joints will be placed on the [https://www.modot.org/materials Pre-Acceptance Lists] on the MoDOT website maintained by the Central Office in accordance with [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=4 Sec 106]. These lists are found in the [http://~~www2~~.modot.mo.gov/business/materials/pdf/PAL/PICK%20LIST%20OF%20PAL%20MATERIALS.pdf Material for Joints Pre-Acceptance List].		Manufacturers and brand names (as applicable) of dowel bars, tie bars, hot pour elastic joint sealer, performed fiber expansion joint filler, plastic waterstop, rubber waterstop, copper sheeting for flashing, preformed sponge rubber expansion joint filler, plastic joint compound for pipe, and silicone sealant for joints will be placed on the [https://www.modot.org/materials Pre-Acceptance Lists] on the MoDOT website maintained by the Central Office in accordance with [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=4 Sec 106]. These lists are found in the [http://www.modot.mo.gov/business/materials/pdf/PAL/PICK%20LIST%20OF%20PAL%20MATERIALS.pdf Material for Joints Pre-Acceptance List].

	===1057.2.2 Manufacturer and Brand Name Approval===		===1057.2.2 Manufacturer and Brand Name Approval===

Smithk: /* 1057.2.1 Pre-Acceptance Lists */

2018-11-13T20:48:27Z

1057.2.1 Pre-Acceptance Lists

← Older revision		Revision as of 15:48, 13 November 2018
Line 19:		Line 19:
	==1057.2 Procedure==		==1057.2 Procedure==
	===1057.2.1 Pre-Acceptance Lists===		===1057.2.1 Pre-Acceptance Lists===
	Manufacturers and brand names (as applicable) of dowel bars, tie bars, hot pour elastic joint sealer, performed fiber expansion joint filler, plastic waterstop, rubber waterstop, copper sheeting for flashing, preformed sponge rubber expansion joint filler, plastic joint compound for pipe, and silicone sealant for joints will be placed on the [https://www.modot.org/materials Pre-Acceptance Lists] on the MoDOT website maintained by the Central Office in accordance with [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=4 Sec 106]. These lists are found in the [http://~~www~~.modot.mo.gov/business/materials/pdf/PAL/PICK%20LIST%20OF%20PAL%20MATERIALS.pdf Material for Joints Pre-Acceptance List].		Manufacturers and brand names (as applicable) of dowel bars, tie bars, hot pour elastic joint sealer, performed fiber expansion joint filler, plastic waterstop, rubber waterstop, copper sheeting for flashing, preformed sponge rubber expansion joint filler, plastic joint compound for pipe, and silicone sealant for joints will be placed on the [https://www.modot.org/materials Pre-Acceptance Lists] on the MoDOT website maintained by the Central Office in accordance with [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=4 Sec 106]. These lists are found in the [http://www2.modot.mo.gov/business/materials/pdf/PAL/PICK%20LIST%20OF%20PAL%20MATERIALS.pdf Material for Joints Pre-Acceptance List].

	===1057.2.2 Manufacturer and Brand Name Approval===		===1057.2.2 Manufacturer and Brand Name Approval===

Smithk: /* 1057.2.1 Pre-Acceptance Lists */ updated link

2018-11-13T20:48:02Z

1057.2.1 Pre-Acceptance Lists: updated link

← Older revision		Revision as of 15:48, 13 November 2018
Line 19:		Line 19:
	==1057.2 Procedure==		==1057.2 Procedure==
	===1057.2.1 Pre-Acceptance Lists===		===1057.2.1 Pre-Acceptance Lists===
	Manufacturers and brand names (as applicable) of dowel bars, tie bars, hot pour elastic joint sealer, performed fiber expansion joint filler, plastic waterstop, rubber waterstop, copper sheeting for flashing, preformed sponge rubber expansion joint filler, plastic joint compound for pipe, and silicone sealant for joints will be placed on the [~~http~~://modot.~~mo.gov/business~~/materials~~/pdf/pal/palcont.pdf~~ Pre-Acceptance Lists] on the MoDOT website maintained by the Central Office in accordance with [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=4 Sec 106]. These lists are found in the [http://www.modot.mo.gov/business/materials/pdf/PAL/PICK%20LIST%20OF%20PAL%20MATERIALS.pdf Material for Joints Pre-Acceptance List].		Manufacturers and brand names (as applicable) of dowel bars, tie bars, hot pour elastic joint sealer, performed fiber expansion joint filler, plastic waterstop, rubber waterstop, copper sheeting for flashing, preformed sponge rubber expansion joint filler, plastic joint compound for pipe, and silicone sealant for joints will be placed on the [https://www.modot.org/materials Pre-Acceptance Lists] on the MoDOT website maintained by the Central Office in accordance with [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=4 Sec 106]. These lists are found in the [http://www.modot.mo.gov/business/materials/pdf/PAL/PICK%20LIST%20OF%20PAL%20MATERIALS.pdf Material for Joints Pre-Acceptance List].

	===1057.2.2 Manufacturer and Brand Name Approval===		===1057.2.2 Manufacturer and Brand Name Approval===

Smithk: updated link

2018-10-16T12:52:58Z

updated link

← Older revision		Revision as of 07:52, 16 October 2018
Line 3:		Line 3:
	\|'''MGS Information'''		\|'''MGS Information'''
	\|-		\|-
	\|[~~http~~://www.modot.~~mo.gov/business/materials/pdf~~/mgs~~/MGSINDEX.pdf~~ Current General Services Specifications (MGS) By Subject]		\|[https://www.modot.org/general-services-specifications-mgs-subject Current General Services Specifications (MGS) By Subject]
	\|}		\|}

Smithk: updated links

2016-06-15T18:03:45Z

updated links

← Older revision		Revision as of 13:03, 15 June 2016
Line 6:		Line 6:
	\|}		\|}

	This guidance establishes procedures for inspecting, [[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling\|sampling]], testing and reporting materials for joints. Refer to [http://www.modot.~~mo.gov~~/business/standards_and_specs/~~Sec1057~~.pdf Sec 1057] for MoDOT's specifications.		This guidance establishes procedures for inspecting, [[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling\|sampling]], testing and reporting materials for joints. Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1057] for MoDOT's specifications.

	For Laboratory testing and sample reporting procedures, refer to [[1057.4 Laboratory Testing for Sec 1057\|EPG 1057.4 Laboratory Testing Guidelines for Sec 1057]].		For Laboratory testing and sample reporting procedures, refer to [[1057.4 Laboratory Testing for Sec 1057\|EPG 1057.4 Laboratory Testing Guidelines for Sec 1057]].
Line 19:		Line 19:
	==1057.2 Procedure==		==1057.2 Procedure==
	===1057.2.1 Pre-Acceptance Lists===		===1057.2.1 Pre-Acceptance Lists===
	Manufacturers and brand names (as applicable) of dowel bars, tie bars, hot pour elastic joint sealer, performed fiber expansion joint filler, plastic waterstop, rubber waterstop, copper sheeting for flashing, preformed sponge rubber expansion joint filler, plastic joint compound for pipe, and silicone sealant for joints will be placed on the [http://modot.mo.gov/business/materials/pdf/pal/palcont.pdf Pre-Acceptance Lists] on the MoDOT website maintained by the Central Office in accordance with [http://www.modot.~~mo.gov~~/business/standards_and_specs/~~Sec0106~~.pdf Sec 106]. These lists are found in the [http://www.modot.mo.gov/business/materials/pdf/PAL/PICK%20LIST%20OF%20PAL%20MATERIALS.pdf Material for Joints Pre-Acceptance List].		Manufacturers and brand names (as applicable) of dowel bars, tie bars, hot pour elastic joint sealer, performed fiber expansion joint filler, plastic waterstop, rubber waterstop, copper sheeting for flashing, preformed sponge rubber expansion joint filler, plastic joint compound for pipe, and silicone sealant for joints will be placed on the [http://modot.mo.gov/business/materials/pdf/pal/palcont.pdf Pre-Acceptance Lists] on the MoDOT website maintained by the Central Office in accordance with [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=4 Sec 106]. These lists are found in the [http://www.modot.mo.gov/business/materials/pdf/PAL/PICK%20LIST%20OF%20PAL%20MATERIALS.pdf Material for Joints Pre-Acceptance List].

	===1057.2.2 Manufacturer and Brand Name Approval===		===1057.2.2 Manufacturer and Brand Name Approval===
	If a manufacturer desires to have material added to the Pre-Acceptance List of material for joints, a certification and guarantee must be submitted to Central Office Construction and Materials in accordance with the requirements of Specification [http://modot.~~mo.gov~~/business/standards_and_specs/~~Sec1057~~.pdf Sec 1057]. The certification and guarantee shall be accompanied by a sample of the material, if required by the specification, for laboratory testing. Upon approval of the material, it will be placed on the applicable list.		If a manufacturer desires to have material added to the Pre-Acceptance List of material for joints, a certification and guarantee must be submitted to Central Office Construction and Materials in accordance with the requirements of Specification [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1057]. The certification and guarantee shall be accompanied by a sample of the material, if required by the specification, for laboratory testing. Upon approval of the material, it will be placed on the applicable list.

	===1057.2.3 Basis of Acceptance===		===1057.2.3 Basis of Acceptance===
Line 88:		Line 88:

	===1057.3.3 Material Purchased for Maintenance===		===1057.3.3 Material Purchased for Maintenance===
	Material purchased for maintenance work will be accepted in accordance with [http://modot.~~mo.gov~~/business/standards_and_specs/~~Sec1057~~.pdf Sec 1057.2].		Material purchased for maintenance work will be accepted in accordance with [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1057.2].

Smithk: /* 1057.2.4 Sampling */ "ensure" correction

2010-07-09T12:51:20Z

1057.2.4 Sampling: "ensure" correction

← Older revision		Revision as of 07:51, 9 July 2010
Line 32:		Line 32:
	====1057.2.4.1 Dowel Bars====		====1057.2.4.1 Dowel Bars====
	[[image:1057.2.4.1.jpg\|right\|300px]]		[[image:1057.2.4.1.jpg\|right\|300px]]
	Dowel bars for use in dowel supporting units shall be inspected in accordance with [[:Category:1036 Reinforcing Steel for Concrete\|Reinforcing Steel for Concrete]]. In addition, the inspector shall ~~insure~~ that the bars are smooth, round, and free of cutting burrs and other projections.		Dowel bars for use in dowel supporting units shall be inspected in accordance with [[:Category:1036 Reinforcing Steel for Concrete\|Reinforcing Steel for Concrete]]. In addition, the inspector shall ensure that the bars are smooth, round, and free of cutting burrs and other projections.

	'''1057.2.4.1.1 Dowel Supporting Units.''' Dowel supporting units shall be inspected to ~~insure~~ that approved bars are used to fabricate a unit meeting the requirements of [http://modot.mo.gov/business/standards_and_specs/documents/50210.pdf Standard Drawing 502.10].		'''1057.2.4.1.1 Dowel Supporting Units.''' Dowel supporting units shall be inspected to ensure that approved bars are used to fabricate a unit meeting the requirements of [http://modot.mo.gov/business/standards_and_specs/documents/50210.pdf Standard Drawing 502.10].

	'''1057.2.4.1.2 Graphite Grease.''' The free end of the dowel bar is given a coating of approved graphite grease. Graphite grease shall be applied in a manner that will result in a thorough covering of that section of the bar with a thin uniform coating. Graphite grease shall be accepted on the basis of manufacturer's certification or label analysis showing specification compliance. In many cases, this is performed in the field by the Resident Engineer. No testing or reporting is required. If the graphite grease containers do not show the necessary information and if certification cannot be obtained, samples are to be submitted to the Central Laboratory.		'''1057.2.4.1.2 Graphite Grease.''' The free end of the dowel bar is given a coating of approved graphite grease. Graphite grease shall be applied in a manner that will result in a thorough covering of that section of the bar with a thin uniform coating. Graphite grease shall be accepted on the basis of manufacturer's certification or label analysis showing specification compliance. In many cases, this is performed in the field by the Resident Engineer. No testing or reporting is required. If the graphite grease containers do not show the necessary information and if certification cannot be obtained, samples are to be submitted to the Central Laboratory.
Line 69:		Line 69:

	====1057.2.4.9 Plastic Joint Compound for Vitrified Clay and Concrete Pipe====		====1057.2.4.9 Plastic Joint Compound for Vitrified Clay and Concrete Pipe====
	A sample of trowel grade, bulk type compound shall consist of approximately one gallon (4 liters) of material in a friction top can. A sample of extruded rope or flat tape shall consist of approximately 0.5 lb (230 g) of material in a friction top can or other suitable airtight container. Primer, if required to be used with extruded rope or flat tape types to maintain the material in position while pipe sections are being joined, shall be checked to ~~insure~~ that it has been recommended by the manufacturer of the joint material.		A sample of trowel grade, bulk type compound shall consist of approximately one gallon (4 liters) of material in a friction top can. A sample of extruded rope or flat tape shall consist of approximately 0.5 lb (230 g) of material in a friction top can or other suitable airtight container. Primer, if required to be used with extruded rope or flat tape types to maintain the material in position while pipe sections are being joined, shall be checked to ensure that it has been recommended by the manufacturer of the joint material.

	====1057.2.4.10 Silicone Expansion Joint Sealant====		====1057.2.4.10 Silicone Expansion Joint Sealant====

Smithk: /* 1057.2.4 Sampling */ updated link

2010-07-01T20:01:31Z

1057.2.4 Sampling: updated link

← Older revision		Revision as of 15:01, 1 July 2010
Line 28:		Line 28:

	===1057.2.4 Sampling===		===1057.2.4 Sampling===
	Each producer or supplier will be assigned to a district office for Facility Review, Sampling and Testing in accordance with [[106.2 Pre-Acceptance Lists (PAL)\|EPG 106.2 Pre-Acceptance Lists (PAL)]]. During the visit, samples of material available at the facility should be obtained. Materials selected for sampling will typically be those that have been used in MoDOT work during the past month. Material originating at locations too far from the assigned district’s office is subject to sampling at an intermediate location or at the jobsite. It is the assigned district’s responsibility to coordinate with the supplier and other districts to assure the proper materials are sampled.		Each producer or supplier will be assigned to a district office for Facility Review, Sampling and Testing in accordance with [[106.12 Pre-Acceptance Lists (PAL)\|EPG 106.12 Pre-Acceptance Lists (PAL)]]. During the visit, samples of material available at the facility should be obtained. Materials selected for sampling will typically be those that have been used in MoDOT work during the past month. Material originating at locations too far from the assigned district’s office is subject to sampling at an intermediate location or at the jobsite. It is the assigned district’s responsibility to coordinate with the supplier and other districts to assure the proper materials are sampled.

	====1057.2.4.1 Dowel Bars====		====1057.2.4.1 Dowel Bars====

Smithk: /* 1057.2.3 Basis of Acceptance */ updated link

2010-07-01T20:01:10Z

1057.2.3 Basis of Acceptance: updated link

← Older revision		Revision as of 15:01, 1 July 2010
Line 25:		Line 25:

	===1057.2.3 Basis of Acceptance===		===1057.2.3 Basis of Acceptance===
	Material is accepted by the PAL criteria as indicated in [[106.2 Pre-Acceptance Lists (PAL)\|EPG 106.2 Pre-Acceptance Lists (PAL)]]. Central Office Construction and Materials will retain the original certification and guarantee. Additional certification is not necessary if the manufacturer and brand of material is clearly identified on the packaging or the documentation included with the shipment.		Material is accepted by the PAL criteria as indicated in [[106.12 Pre-Acceptance Lists (PAL)\|EPG 106.12 Pre-Acceptance Lists (PAL)]]. Central Office Construction and Materials will retain the original certification and guarantee. Additional certification is not necessary if the manufacturer and brand of material is clearly identified on the packaging or the documentation included with the shipment.

	===1057.2.4 Sampling===		===1057.2.4 Sampling===