Category:1059 Protective Coating Material - Revision history

Smithk: Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

2021-10-18T15:14:41Z

Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

← Older revision		Revision as of 10:14, 18 October 2021
Line 47:		Line 47:
	===1059.2.3 Sampling of Protective Coating for Concrete Bents and Piers (urethane), Protective Coating for Concrete Bents and Piers (epoxy), Concrete and Masonry Protective Systems, Sacrificial Graffiti Protection Systems and Temporary Coating for Concrete Bents and Piers (weathering steel)===		===1059.2.3 Sampling of Protective Coating for Concrete Bents and Piers (urethane), Protective Coating for Concrete Bents and Piers (epoxy), Concrete and Masonry Protective Systems, Sacrificial Graffiti Protection Systems and Temporary Coating for Concrete Bents and Piers (weathering steel)===

	Take samples any time the certification indicates test results approaching the specification limits or any time that conditions warrant additional inspection. When samples are taken, the sample size is 1 qt. (1 liter) in a screw top can. Use		Take samples any time the certification indicates test results approaching the specification limits or any time that conditions warrant additional inspection. When samples are taken, the sample size is 1 qt. (1 liter) in a screw top can. Use AASHTOWARE Project (AWP) and include complete information as to brand name and lot or batch number. The manufacturer's certification for the lot sampled is retained in the district office.
	~~SiteManager~~ and include complete information as to brand name and lot or batch number. The manufacturer's certification for the lot sampled is retained in the district office.

	==1059.3 Report==		==1059.3 Report==

	If the material is accepted in the field, it is reported through ~~SiteManager~~. The form should show all pertinent information regarding the material and the certification is retained in the district office. The report is to indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the report to clarify conditions of acceptance or rejection.		If the material is accepted in the field, it is reported through AWP. The form should show all pertinent information regarding the material and the certification is retained in the district office. The report is to indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the report to clarify conditions of acceptance or rejection.

Smithk: /* 1059.2.1 Qualified Lists */ updated links

2019-04-24T14:22:08Z

1059.2.1 Qualified Lists: updated links

← Older revision		Revision as of 09:22, 24 April 2019
Line 21:		Line 21:
	Lists of qualified manufacturers and brand names of protective coating for concrete bents and piers (urethane and epoxy), concrete and masonry protective systems, sacrificial graffiti protection system and temporary coating for concrete bents and piers (weathering steel) is maintained by Construction and Materials. These lists are available at:		Lists of qualified manufacturers and brand names of protective coating for concrete bents and piers (urethane and epoxy), concrete and masonry protective systems, sacrificial graffiti protection system and temporary coating for concrete bents and piers (weathering steel) is maintained by Construction and Materials. These lists are available at:

	:*[~~http~~://www.modot.~~mo.gov~~/~~business~~/~~materials/pdf/vol_1/FS1059T1.pdf~~ Qualified Protective Coating – Concrete Bents and Piers (Urethane)(1059PCCBPR)]		:*[https://www.modot.org/media/531 Qualified Protective Coating – Concrete Bents and Piers (Urethane)(1059PCCBPR)]

	:* [~~http~~://www.modot.~~mo.gov~~/~~business~~/~~materials/pdf/vol_1/FS1059T2.pdf~~ Qualified Protective Coating – Concrete Bents and Piers (Epoxy)(1059PCECBP)]		:* [https://www.modot.org/media/532 Qualified Protective Coating – Concrete Bents and Piers (Epoxy)(1059PCECBP)]

	:*[~~http~~://www.modot.~~mo.gov~~/~~business~~/~~materials/pdf/vol_1/FS1059T3.pdf~~ Qualified Concrete and Masonry Protective System (1059PCCCCMPS)]		:*[https://www.modot.org/media/533 Qualified Concrete and Masonry Protective System (1059PCCCCMPS)]

	:*[~~http~~://www.modot.~~mo.gov~~/~~business~~/~~materials/pdf/vol_1/FS1059T4.pdf~~ Qualified Sacrificial Graffiti Protection Systems (1059PCSGPS)]		:*[https://www.modot.org/media/534 Qualified Sacrificial Graffiti Protection Systems (1059PCSGPS)]

	:*[~~http~~://www.modot.~~mo.gov~~/~~business~~/~~materials/pdf/vol_1/FS1059T5.pdf~~ Qualified Temporary Coating – Concrete Bents and Piers (Weathering Steel) (1059PCTMWS)]		:*[https://www.modot.org/media/535 Qualified Temporary Coating – Concrete Bents and Piers (Weathering Steel) (1059PCTMWS)]

	===1059.2.2 Basis of Acceptance===		===1059.2.2 Basis of Acceptance===

Smithk at 19:31, 20 March 2019

2019-03-20T19:31:29Z

← Older revision		Revision as of 14:31, 20 March 2019
Line 1:		Line 1:
	[[image:1059.2.1 graffiti.jpg\|right\|250px\|thumb\|<center>'''Graffiti'''</center>]]		[[image:1059.2.1 graffiti.jpg\|right\|250px\|thumb\|<center>'''Graffiti'''</center>]]
	{\|style="padding: 0.3em; margin-~~left~~:~~1px~~; border:2px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="280px" align="left"		{\|style="padding: 0.3em; margin-right:8px; border:2px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="280px" align="left"
	\|-		\|-
	\|'''MGS Information'''		\|'''MGS Information'''

Smithk: updated link

2018-10-11T19:55:05Z

updated link

← Older revision		Revision as of 14:55, 11 October 2018
Line 4:		Line 4:
	\|'''MGS Information'''		\|'''MGS Information'''
	\|-		\|-
	\|[~~http~~://www.modot.~~mo.gov/business/materials/pdf~~/mgs~~/MGSINDEX.pdf~~ Current General Services Specifications (MGS) By Subject]		\|[https://www.modot.org/general-services-specifications-mgs-subject Current General Services Specifications (MGS) By Subject]
	\|}		\|}

Smithk: updated links

2016-06-15T18:35:48Z

updated links

← Older revision		Revision as of 13:35, 15 June 2016
Line 7:		Line 7:
	\|}		\|}

	This article establishes procedures for inspecting, accepting and reporting of protective coating for concrete bents and piers (urethane and epoxy), concrete and masonry protective systems, sacrificial graffiti protection system and temporary coating for concrete bents and piers (weathering steel). Refer to [http://www.modot.~~mo.gov~~/business/standards_and_specs/~~Sec1059~~.pdf Sec 1059] for MoDOT’s specifications.		This article establishes procedures for inspecting, accepting and reporting of protective coating for concrete bents and piers (urethane and epoxy), concrete and masonry protective systems, sacrificial graffiti protection system and temporary coating for concrete bents and piers (weathering steel). Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1059] for MoDOT’s specifications.

	For Laboratory testing and sample reporting procedures, refer to [[1059.4 Laboratory Testing Guidelines for Sec 1059\|EPG 1059.4 Laboratory Testing Guidelines for Sec 1059]].		For Laboratory testing and sample reporting procedures, refer to [[1059.4 Laboratory Testing Guidelines for Sec 1059\|EPG 1059.4 Laboratory Testing Guidelines for Sec 1059]].
Line 39:		Line 39:
	====1059.2.2.2 Acceptance of Concrete and Masonry Protective Systems====		====1059.2.2.2 Acceptance of Concrete and Masonry Protective Systems====

	Material on the list of qualified Concrete and Masonry Protective Systems may be accepted on the basis of manufacturer's certification and random sampling and testing, when deemed necessary. The manufacturer's certification is to be furnished to the receiving district and is to certify that the material supplied is the same composition as originally qualified. This material also requires field approval in accordance with [http://www.modot.~~mo.gov~~/business/standards_and_specs/~~Sec1059~~.pdf Sec 1059.30.4].		Material on the list of qualified Concrete and Masonry Protective Systems may be accepted on the basis of manufacturer's certification and random sampling and testing, when deemed necessary. The manufacturer's certification is to be furnished to the receiving district and is to certify that the material supplied is the same composition as originally qualified. This material also requires field approval in accordance with [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1059.30.4].

	====1059.2.2.3 Acceptance of Sacrificial Graffiti Protection Systems====		====1059.2.2.3 Acceptance of Sacrificial Graffiti Protection Systems====

	Material on the list of qualified Sacrificial Graffiti Protection Systems may be accepted on the basis of manufacturer's certification and random sampling and testing, when deemed necessary. The manufacturer's certification is to be furnished to the receiving district and is to certify that the material supplied is the same composition as originally qualified. This material also requires field approval in accordance with [http://www.modot.~~mo.gov~~/business/standards_and_specs/~~Sec1059~~.pdf Sec 1059.40.4].		Material on the list of qualified Sacrificial Graffiti Protection Systems may be accepted on the basis of manufacturer's certification and random sampling and testing, when deemed necessary. The manufacturer's certification is to be furnished to the receiving district and is to certify that the material supplied is the same composition as originally qualified. This material also requires field approval in accordance with [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1059.40.4].

	===1059.2.3 Sampling of Protective Coating for Concrete Bents and Piers (urethane), Protective Coating for Concrete Bents and Piers (epoxy), Concrete and Masonry Protective Systems, Sacrificial Graffiti Protection Systems and Temporary Coating for Concrete Bents and Piers (weathering steel)===		===1059.2.3 Sampling of Protective Coating for Concrete Bents and Piers (urethane), Protective Coating for Concrete Bents and Piers (epoxy), Concrete and Masonry Protective Systems, Sacrificial Graffiti Protection Systems and Temporary Coating for Concrete Bents and Piers (weathering steel)===

Smithk: /* 1059.3 Report */ updated link

2010-07-01T17:47:19Z

1059.3 Report: updated link

← Older revision		Revision as of 12:47, 1 July 2010
Line 52:		Line 52:
	==1059.3 Report==		==1059.3 Report==

	If the material is accepted in the field, it is reported through SiteManager. The form should show all pertinent information regarding the material and the certification is retained in the district office. The report is to indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting ~~Test Results~~\|EPG 106.9 Reporting ~~Test Results~~]], are to be included in the report to clarify conditions of acceptance or rejection.		If the material is accepted in the field, it is reported through SiteManager. The form should show all pertinent information regarding the material and the certification is retained in the district office. The report is to indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the report to clarify conditions of acceptance or rejection.

Smithk: minor clarifications to differentiate EPG articles (that are referenced as "articles", not "sections") from specifications (that are referenced as "sections")

2010-03-31T13:29:16Z

minor clarifications to differentiate EPG articles (that are referenced as "articles", not "sections") from specifications (that are referenced as "sections")

← Older revision		Revision as of 08:29, 31 March 2010
Line 9:		Line 9:
	This article establishes procedures for inspecting, accepting and reporting of protective coating for concrete bents and piers (urethane and epoxy), concrete and masonry protective systems, sacrificial graffiti protection system and temporary coating for concrete bents and piers (weathering steel). Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec1059.pdf Sec 1059] for MoDOT’s specifications.		This article establishes procedures for inspecting, accepting and reporting of protective coating for concrete bents and piers (urethane and epoxy), concrete and masonry protective systems, sacrificial graffiti protection system and temporary coating for concrete bents and piers (weathering steel). Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec1059.pdf Sec 1059] for MoDOT’s specifications.

	For Laboratory testing and sample reporting procedures, refer to [[1059.4 Laboratory Testing Guidelines for Sec 1059\|1059.4 Laboratory Testing Guidelines for Sec 1059]].		For Laboratory testing and sample reporting procedures, refer to [[1059.4 Laboratory Testing Guidelines for Sec 1059\|EPG 1059.4 Laboratory Testing Guidelines for Sec 1059]].

	==1059.1 Apparatus==		==1059.1 Apparatus==
Line 52:		Line 52:
	==1059.3 Report==		==1059.3 Report==

	If the material is accepted in the field, it is reported through SiteManager. The form should show all pertinent information regarding the material and the certification is retained in the district office. The report is to indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting Test Results\|106.9 Reporting Test Results]], are to be included in the report to clarify conditions of acceptance or rejection.		If the material is accepted in the field, it is reported through SiteManager. The form should show all pertinent information regarding the material and the certification is retained in the district office. The report is to indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting Test Results\|EPG 106.9 Reporting Test Results]], are to be included in the report to clarify conditions of acceptance or rejection.

Smithk: updated qualified manufacturers and brands by replacing tables with links to updated lists

2008-09-30T18:22:29Z

updated qualified manufacturers and brands by replacing tables with links to updated lists

Show changes

Smithk: article construction

2007-10-29T17:45:27Z

article construction

← Older revision		Revision as of 12:45, 29 October 2007
Line 1:		Line 1:
	[[image:1059.2.1 graffiti.jpg\|right\|250px\|thumb\|<center>'''Graffiti'''</center>]]		[[image:1059.2.1 graffiti.jpg\|right\|250px\|thumb\|<center>'''Graffiti'''</center>]]
			{\|style="padding: 0.3em; margin-left:1px; border:2px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="280px" align="left"
			\|-
			\|'''MGS Information'''
			\|-
			\|[http://www.modot.mo.gov/business/materials/pdf/mgs/MGSINDEX.pdf Current General Services Specifications (MGS) By Subject]
			\|}

	This article establishes procedures for inspecting, accepting and reporting of protective coating for concrete bents and piers (urethane and epoxy), concrete and masonry protective systems, sacrificial graffiti protection system and temporary coating for concrete bents and piers (weathering steel). Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec1059.pdf Sec 1059] for MoDOT’s specifications.		This article establishes procedures for inspecting, accepting and reporting of protective coating for concrete bents and piers (urethane and epoxy), concrete and masonry protective systems, sacrificial graffiti protection system and temporary coating for concrete bents and piers (weathering steel). Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec1059.pdf Sec 1059] for MoDOT’s specifications.

Smithk: article construction

2007-09-07T19:37:17Z

article construction

← Older revision		Revision as of 14:37, 7 September 2007
Line 1:		Line 1:
	[[image:1059.2.1 graffiti.jpg\|right\|250px\|thumb\|<center>'''Graffiti'''</center>]]		[[image:1059.2.1 graffiti.jpg\|right\|250px\|thumb\|<center>'''Graffiti'''</center>]]
	This article establishes procedures for inspecting, accepting and reporting of protective coating for concrete bents and piers (urethane and epoxy), concrete and masonry protective systems, sacrificial graffiti protection system and temporary coating for concrete bents and piers (weathering steel). Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec1059.pdf Sec 1059] for MoDOT’s specifications.		This article establishes procedures for inspecting, accepting and reporting of protective coating for concrete bents and piers (urethane and epoxy), concrete and masonry protective systems, sacrificial graffiti protection system and temporary coating for concrete bents and piers (weathering steel). Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec1059.pdf Sec 1059] for MoDOT’s specifications.

			For Laboratory testing and sample reporting procedures, refer to [[1059.4 Laboratory Testing Guidelines for Sec 1059\|1059.4 Laboratory Testing Guidelines for Sec 1059]].

	==1059.1 Apparatus==		==1059.1 Apparatus==