Category:1062 Pull and Junction Boxes - Revision history

Smithk: Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

2021-10-19T15:49:45Z

Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

← Older revision		Revision as of 10:49, 19 October 2021
Line 46:		Line 46:
	Reports shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[:category: 106 Control of Material#Reporting Test Results\|Reporting Test Results]], are to be included in the report to clarify conditions of acceptance or rejection.		Reports shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[:category: 106 Control of Material#Reporting Test Results\|Reporting Test Results]], are to be included in the report to clarify conditions of acceptance or rejection.

	Items in this article shall be reported through ~~SiteManager~~. The manufacturer's certification, when required, shall be retained in the district office.		Items in this article shall be reported through AASHTOWARE Project (AWP). The manufacturer's certification, when required, shall be retained in the district office.

Smithk: /* 1062.2.1 Precast Concrete Pull Boxes */

2019-04-24T13:34:34Z

1062.2.1 Precast Concrete Pull Boxes

← Older revision		Revision as of 08:34, 24 April 2019
Line 20:		Line 20:

	Acceptance of precast concrete pull boxes is to be based on the inspection of materials being incorporated into the boxes and inspection of the finished box. Compressive tests and absorption test specimens will not be required.		Acceptance of precast concrete pull boxes is to be based on the inspection of materials being incorporated into the boxes and inspection of the finished box. Compressive tests and absorption test specimens will not be required.
	{\|style="padding: 0.3em; margin-left:~~1px~~; border:2px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="280px" align="right"		{\|style="padding: 0.3em; margin-left:7px; border:2px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="280px" align="right"
	\|-		\|-
	\|'''MGS Information'''		\|'''MGS Information'''

Smithk: updated link

2018-10-11T19:46:52Z

updated link

← Older revision		Revision as of 14:46, 11 October 2018
Line 24:		Line 24:
	\|'''MGS Information'''		\|'''MGS Information'''
	\|-		\|-
	\|[~~http~~://www.modot.~~mo.gov/business/materials/pdf~~/mgs~~/MGSINDEX.pdf~~ Current General Services Specifications (MGS) By Subject]		\|[https://www.modot.org/general-services-specifications-mgs-subject Current General Services Specifications (MGS) By Subject]
	\|}		\|}

Smithk: updated link

2016-06-15T18:37:58Z

updated link

← Older revision		Revision as of 13:37, 15 June 2016
Line 7:		Line 7:

	This article establishes procedures for inspecting, [[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling\|sampling]] and reporting pull boxes, junction		This article establishes procedures for inspecting, [[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling\|sampling]] and reporting pull boxes, junction
	boxes and pull box frames and covers. Refer to [http://www.modot.~~mo.gov~~/business/standards_and_specs/~~Sec1062~~.pdf Sec 1062] for MoDOT’s specifications.		boxes and pull box frames and covers. Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1062] for MoDOT’s specifications.

	==1062.1 Apparatus==		==1062.1 Apparatus==
Line 29:		Line 29:
	===1062.2.2 Preformed Pull Boxes===		===1062.2.2 Preformed Pull Boxes===

	Acceptance of preformed polyester resin mortar, preformed resin mortar and fiberglass pull boxes is to be based upon current listing of the manufacturer and model number on the Traffic Operations approved products list, manufactures certification and [[:643.3 Policy, Standards and Regulations#643.3.3 Definitions and General Information\|examination of dimensions]] and workmanship to determine conformance to the applicable standard plan and [http://www.modot.~~mo.gov~~/business/standards_and_specs/~~Sec1062~~.pdf Sec 1062]. The manufacturer's certification for pull boxes shall state that the material supplied conforms to all of the requirements specified.		Acceptance of preformed polyester resin mortar, preformed resin mortar and fiberglass pull boxes is to be based upon current listing of the manufacturer and model number on the Traffic Operations approved products list, manufactures certification and [[:643.3 Policy, Standards and Regulations#643.3.3 Definitions and General Information\|examination of dimensions]] and workmanship to determine conformance to the applicable standard plan and [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1062]. The manufacturer's certification for pull boxes shall state that the material supplied conforms to all of the requirements specified.

	Inspection of preformed pull boxes should identify any structural concerns, such as fiber mesh not covered by resin mortar in a localized area, areas that can be penetrated by physical means due to voids or less dense material, or visible cracks especially around the mounting lag nuts.		Inspection of preformed pull boxes should identify any structural concerns, such as fiber mesh not covered by resin mortar in a localized area, areas that can be penetrated by physical means due to voids or less dense material, or visible cracks especially around the mounting lag nuts.

Smithk: update link

2010-07-01T16:14:03Z

update link

← Older revision		Revision as of 11:14, 1 July 2010
Line 6:		Line 6:
	\|}		\|}

	This article establishes procedures for inspecting, [[106.5 Sampling\|sampling]] and reporting pull boxes, junction		This article establishes procedures for inspecting, [[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling\|sampling]] and reporting pull boxes, junction
	boxes and pull box frames and covers. Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec1062.pdf Sec 1062] for MoDOT’s specifications.		boxes and pull box frames and covers. Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec1062.pdf Sec 1062] for MoDOT’s specifications.

Smithk: /* 1062.3 Report */ minor clarification

2010-04-16T17:27:49Z

1062.3 Report: minor clarification

← Older revision		Revision as of 12:27, 16 April 2010
Line 46:		Line 46:
	Reports shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[:category: 106 Control of Material#Reporting Test Results\|Reporting Test Results]], are to be included in the report to clarify conditions of acceptance or rejection.		Reports shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[:category: 106 Control of Material#Reporting Test Results\|Reporting Test Results]], are to be included in the report to clarify conditions of acceptance or rejection.

	Items in this ~~section~~ shall be reported through SiteManager. The manufacturer's certification, when required, shall be retained in the district office.		Items in this article shall be reported through SiteManager. The manufacturer's certification, when required, shall be retained in the district office.

Smithk: /* 1062.2 Procedure */ article construction

2009-07-21T15:32:46Z

1062.2 Procedure: article construction

← Older revision		Revision as of 10:32, 21 July 2009
Line 29:		Line 29:
	===1062.2.2 Preformed Pull Boxes===		===1062.2.2 Preformed Pull Boxes===

	Acceptance of preformed polyester resin mortar, preformed resin mortar and fiberglass pull boxes is to be based upon current listing of the manufacturer and model number on the Traffic Operations approved products list, manufactures certification and [[:643.3 Policy, Standards and Regulations#643.3.1.3 Definitions and General Information\|examination of dimensions]] and workmanship to determine conformance to the applicable standard plan and [http://www.modot.mo.gov/business/standards_and_specs/Sec1062.pdf Sec 1062]. The manufacturer's certification for pull boxes shall state that the material supplied conforms to all of the requirements specified.		Acceptance of preformed polyester resin mortar, preformed resin mortar and fiberglass pull boxes is to be based upon current listing of the manufacturer and model number on the Traffic Operations approved products list, manufactures certification and [[:643.3 Policy, Standards and Regulations#643.3.3 Definitions and General Information\|examination of dimensions]] and workmanship to determine conformance to the applicable standard plan and [http://www.modot.mo.gov/business/standards_and_specs/Sec1062.pdf Sec 1062]. The manufacturer's certification for pull boxes shall state that the material supplied conforms to all of the requirements specified.

	Inspection of preformed pull boxes should identify any structural concerns, such as fiber mesh not covered by resin mortar in a localized area, areas that can be penetrated by physical means due to voids or less dense material, or visible cracks especially around the mounting lag nuts.		Inspection of preformed pull boxes should identify any structural concerns, such as fiber mesh not covered by resin mortar in a localized area, areas that can be penetrated by physical means due to voids or less dense material, or visible cracks especially around the mounting lag nuts.
Line 36:		Line 36:
	===1062.2.3 Concrete Pull Box Frames and Covers and Cable Hooks===		===1062.2.3 Concrete Pull Box Frames and Covers and Cable Hooks===

	Concrete pull box frames and covers and cable hooks are to be accepted on the basis of a manufacturer's certification and [[:643.3 Policy, Standards and Regulations#643.3.1.3 Definitions and General Information\|examination of dimensions]], weight (mass) and workmanship to determine conformance to Sec 1062. The manufacturer's certification for cast iron frames and covers is to show the class of cast iron and certify that the material supplied conforms to all of the requirements specified.		Concrete pull box frames and covers and cable hooks are to be accepted on the basis of a manufacturer's certification and [[:643.3 Policy, Standards and Regulations#643.3.3 Definitions and General Information\|examination of dimensions]], weight (mass) and workmanship to determine conformance to Sec 1062. The manufacturer's certification for cast iron frames and covers is to show the class of cast iron and certify that the material supplied conforms to all of the requirements specified.

	===1062.2.4 Junction Boxes===		===1062.2.4 Junction Boxes===

Smithk: article construction

2008-03-10T17:45:05Z

article construction

← Older revision		Revision as of 12:45, 10 March 2008
Line 1:		Line 1:
	[[Image:1062 Preformed pull box.jpg\|right\|~~350px~~\|thumb\|<center>'''Preformed ~~Pull Box~~'''</center>]]		{\|align="right"
			\|-
			\|[[Image:1062 Preformed pull box.jpg\|right\|220px\|thumb\|<center>'''Preformed pull box with a concrete pad to reduce damage requiring over 10 man-hours to form the pad.'''</center>]]
			\|-
			\|[[image:1062 pull box.jpg\|right\|270px\|thumb\|<center>'''By using pull boxes tested for lateral loads, damage is reduced. The pull box costs the same but labor and material for the concrete pad is eliminated.'''</center>]]
			\|}

	This article establishes procedures for inspecting, [[106.5 Sampling\|sampling]] and reporting pull boxes, junction		This article establishes procedures for inspecting, [[106.5 Sampling\|sampling]] and reporting pull boxes, junction
	boxes and pull box frames and covers. Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec1062.pdf Sec 1062] for MoDOT’s specifications.		boxes and pull box frames and covers. Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec1062.pdf Sec 1062] for MoDOT’s specifications.

Smithk: /* 1062.1 Apparatus */article construction

2008-03-04T16:50:58Z

1062.1 Apparatus: article construction

← Older revision		Revision as of 11:50, 4 March 2008
Line 5:		Line 5:
	==1062.1 Apparatus==		==1062.1 Apparatus==

	:(a) Magnetic gauge, reading range of 0-40 mils (0-1000 ~~<sub><math>\~~mu~~\,</math></sub>~~m).		:(a) Magnetic gauge, reading range of 0-40 mils (0-1000 μm).

	:(b) Rule with suitable graduations to accurately measure the material to be inspected.		:(b) Rule with suitable graduations to accurately measure the material to be inspected.

Smithk: article construction

2008-03-04T16:47:31Z

article construction

← Older revision		Revision as of 11:47, 4 March 2008
Line 1:		Line 1:
	[[Image:1062 Preformed pull box.jpg\|right\|350px\|thumb\|<center>'''Preformed Pull Box'''</center>]]		[[Image:1062 Preformed pull box.jpg\|right\|350px\|thumb\|<center>'''Preformed Pull Box'''</center>]]
	This article establishes procedures for inspecting, sampling and reporting pull boxes, junction		This article establishes procedures for inspecting, [[106.5 Sampling\|sampling]] and reporting pull boxes, junction
	boxes and pull box frames and covers. Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec1062.pdf Sec 1062] for MoDOT’s specifications.		boxes and pull box frames and covers. Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec1062.pdf Sec 1062] for MoDOT’s specifications.