Category:603 Water Line Installation - Revision history

Smithk: Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

2021-09-14T13:16:52Z

Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

← Older revision		Revision as of 08:16, 14 September 2021
Line 47:		Line 47:

	===603.2.3 Report (Records)===		===603.2.3 Report (Records)===
	If the material is accepted on the basis of certifications and field inspection, the material shall be reported through ~~SiteManager~~. The report shall show all pertinent information regarding the material. The certification shall be retained in the district office. The report is to indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the report to clarify conditions of acceptance or rejection.		If the material is accepted on the basis of certifications and field inspection, the material shall be reported through AASHTOWARE Project (AWP). The report shall show all pertinent information regarding the material. The certification shall be retained in the district office. The report is to indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the report to clarify conditions of acceptance or rejection.

	==603.3 Laboratory Testing Guidelines for [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=9 Sec 603]==		==603.3 Laboratory Testing Guidelines for [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=9 Sec 603]==
Line 54:		Line 54:
	===603.3.1 Procedure===		===603.3.1 Procedure===

	Chemical analysis for determining purity of copper shall be in accordance with ASTM E53. All test data and calculations shall be recorded in Laboratory workbooks. Test results shall then be recorded through ~~SiteManager~~.		Chemical analysis for determining purity of copper shall be in accordance with ASTM E53. All test data and calculations shall be recorded in Laboratory workbooks. Test results shall then be recorded through AWP.

	Physical property tests conducted in accordance with ASTM B88, Type K, are:		Physical property tests conducted in accordance with ASTM B88, Type K, are:
Line 62:		Line 62:
	:(b) Weight per linear foot.		:(b) Weight per linear foot.

	Test results shall be recorded through ~~SiteManager~~.		Test results shall be recorded through AWP.

	'''Sample Record.''' The sample record shall be completed in ~~SiteManager~~ according to [[:Category:101 Standard Forms#Sample Record General ~~Information~~\| Sample Record General ~~Information]] [[image:bulldozer.jpg\|20px~~]] and shall indicate acceptance, qualified acceptance, or rejection. A copy of the certification shall be attached to the district's hard copy. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on appropriate templates under the Tests tab.		'''Sample Record.''' The sample record shall be completed in AWP according to [[:Category:101 Standard Forms#Sample Record, General\|AWP MA Sample Record, General]] and shall indicate acceptance, qualified acceptance, or rejection. A copy of the certification shall be attached to the district's hard copy. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on appropriate templates under the Tests tab.

Smithk: updated links

2016-06-09T14:50:32Z

updated links

← Older revision		Revision as of 09:50, 9 June 2016
Line 8:		Line 8:
	\|}		\|}

	==603.1 Construction Inspection Guidelines for [http://www.modot.~~mo.gov~~/business/standards_and_specs/~~Sec0603~~.pdf Sec 603]==		==603.1 Construction Inspection Guidelines for [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=9 Sec 603]==

	This work shall consist of installing and furnishing material for water lines and appurtenances		This work shall consist of installing and furnishing material for water lines and appurtenances
Line 49:		Line 49:
	If the material is accepted on the basis of certifications and field inspection, the material shall be reported through SiteManager. The report shall show all pertinent information regarding the material. The certification shall be retained in the district office. The report is to indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the report to clarify conditions of acceptance or rejection.		If the material is accepted on the basis of certifications and field inspection, the material shall be reported through SiteManager. The report shall show all pertinent information regarding the material. The certification shall be retained in the district office. The report is to indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the report to clarify conditions of acceptance or rejection.

	==603.3 Laboratory Testing Guidelines for [http://www.modot.~~mo.gov~~/business/standards_and_specs/~~Sec0603~~.pdf Sec 603]==		==603.3 Laboratory Testing Guidelines for [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=9 Sec 603]==
	This article establishes procedures for Laboratory testing and reporting samples of seamless copper water tube for water lines.		This article establishes procedures for Laboratory testing and reporting samples of seamless copper water tube for water lines.

Smithk: updated link

2013-08-22T14:13:09Z

updated link

← Older revision		Revision as of 09:13, 22 August 2013
Line 3:		Line 3:
	\|'''Additional Information'''		\|'''Additional Information'''
	\|-		\|-
	\|[[643.2 Local Utility Adjustments - Public and Private\|643.2 Local Utility Adjustments - Public and Private]]		\|[[643.2 Local Utility Adjustments - Public and Private\|EPG 643.2 Local Utility Adjustments - Public and Private]]
	\|-		\|-
	\|[[643.3 Policy, Standards and Regulations\|643.3 Policy, Standards and Regulations]]		\|[[643.3 Policy, Standards and Regulations\|EPG 643.3 Policy, Standards and Regulations]]
	\|}		\|}

Line 64:		Line 64:
	Test results shall be recorded through SiteManager.		Test results shall be recorded through SiteManager.

	'''Sample Record.''' The sample record shall be completed in SiteManager according to [~~http~~:~~//contribute.modot.mo.gov/business/materials/pdf/vol_3/AS3510~~.~~pdf Automation Section 3510~~] and shall indicate acceptance, qualified acceptance, or rejection. A copy of the certification shall be attached to the district's hard copy. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on appropriate templates under the Tests tab.		'''Sample Record.''' The sample record shall be completed in SiteManager according to [[:Category:101 Standard Forms#Sample Record General Information\| Sample Record General Information]] [[image:bulldozer.jpg\|20px]] and shall indicate acceptance, qualified acceptance, or rejection. A copy of the certification shall be attached to the district's hard copy. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on appropriate templates under the Tests tab.

Smithk: /* 603.3.1 Procedure */ Per CM, updated link to AS 3510

2011-07-05T20:42:35Z

603.3.1 Procedure: Per CM, updated link to AS 3510

← Older revision		Revision as of 15:42, 5 July 2011
Line 64:		Line 64:
	Test results shall be recorded through SiteManager.		Test results shall be recorded through SiteManager.

	'''Sample Record.''' The sample record shall be completed in SiteManager according to [http://~~wwwi~~/~~intranet~~/cm/~~materials~~/vol_3/AS3510.pdf Automation Section 3510] and shall indicate acceptance, qualified acceptance, or rejection. A copy of the certification shall be attached to the district's hard copy. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on appropriate templates under the Tests tab.		'''Sample Record.''' The sample record shall be completed in SiteManager according to [http://contribute.modot.mo.gov/business/materials/pdf/vol_3/AS3510.pdf Automation Section 3510] and shall indicate acceptance, qualified acceptance, or rejection. A copy of the certification shall be attached to the district's hard copy. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on appropriate templates under the Tests tab.

Smithk: /* 603.3.1 Procedure */ updated link

2010-07-01T18:10:11Z

603.3.1 Procedure: updated link

← Older revision		Revision as of 13:10, 1 July 2010
Line 64:		Line 64:
	Test results shall be recorded through SiteManager.		Test results shall be recorded through SiteManager.

	'''Sample Record.''' The sample record shall be completed in SiteManager according to [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510] and shall indicate acceptance, qualified acceptance, or rejection. A copy of the certification shall be attached to the district's hard copy. Appropriate remarks, as described in [[106.9 Reporting ~~Test Results~~\|EPG 106.9 Reporting ~~Test Results~~]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on appropriate templates under the Tests tab.		'''Sample Record.''' The sample record shall be completed in SiteManager according to [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510] and shall indicate acceptance, qualified acceptance, or rejection. A copy of the certification shall be attached to the district's hard copy. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on appropriate templates under the Tests tab.

Smithk: /* 603.2.3 Report (Records) */ updated link

2010-07-01T18:09:49Z

603.2.3 Report (Records): updated link

← Older revision		Revision as of 13:09, 1 July 2010
Line 47:		Line 47:

	===603.2.3 Report (Records)===		===603.2.3 Report (Records)===
	If the material is accepted on the basis of certifications and field inspection, the material shall be reported through SiteManager. The report shall show all pertinent information regarding the material. The certification shall be retained in the district office. The report is to indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting ~~Test Results~~\|EPG 106.9 Reporting ~~Test Results~~]], are to be included in the report to clarify conditions of acceptance or rejection.		If the material is accepted on the basis of certifications and field inspection, the material shall be reported through SiteManager. The report shall show all pertinent information regarding the material. The certification shall be retained in the district office. The report is to indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the report to clarify conditions of acceptance or rejection.

	==603.3 Laboratory Testing Guidelines for [http://www.modot.mo.gov/business/standards_and_specs/Sec0603.pdf Sec 603]==		==603.3 Laboratory Testing Guidelines for [http://www.modot.mo.gov/business/standards_and_specs/Sec0603.pdf Sec 603]==

Smithk: minor clarifications

2010-04-02T19:46:17Z

minor clarifications

← Older revision		Revision as of 14:46, 2 April 2010
Line 47:		Line 47:

	===603.2.3 Report (Records)===		===603.2.3 Report (Records)===
	If the material is accepted on the basis of certifications and field inspection, the material shall be reported through SiteManager. The report shall show all pertinent information regarding the material. The certification shall be retained in the district office. The report is to indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting Test Results\|106.9 Reporting Test Results]], are to be included in the report to clarify conditions of acceptance or rejection.		If the material is accepted on the basis of certifications and field inspection, the material shall be reported through SiteManager. The report shall show all pertinent information regarding the material. The certification shall be retained in the district office. The report is to indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting Test Results\|EPG 106.9 Reporting Test Results]], are to be included in the report to clarify conditions of acceptance or rejection.

	==603.3 Laboratory Testing Guidelines for [http://www.modot.mo.gov/business/standards_and_specs/Sec0603.pdf Sec 603]==		==603.3 Laboratory Testing Guidelines for [http://www.modot.mo.gov/business/standards_and_specs/Sec0603.pdf Sec 603]==
Line 64:		Line 64:
	Test results shall be recorded through SiteManager.		Test results shall be recorded through SiteManager.

	'''Sample Record.''' The sample record shall be completed in SiteManager according to [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510] and shall indicate acceptance, qualified acceptance, or rejection. A copy of the certification shall be attached to the district's hard copy. Appropriate remarks, as described in [[106.9 Reporting Test Results\|106.9 Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on appropriate templates under the Tests tab.		'''Sample Record.''' The sample record shall be completed in SiteManager according to [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510] and shall indicate acceptance, qualified acceptance, or rejection. A copy of the certification shall be attached to the district's hard copy. Appropriate remarks, as described in [[106.9 Reporting Test Results\|EPG 106.9 Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on appropriate templates under the Tests tab.

EPG-Admin: add "Additional Information" box to link to Utility articles

2008-02-28T14:55:22Z

add "Additional Information" box to link to Utility articles

← Older revision		Revision as of 09:55, 28 February 2008
Line 1:		Line 1:
			{\|style="padding: 0.3em; margin-left:15px; border:1px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="160px" align="right"
			\|-
			\|'''Additional Information'''
			\|-
			\|[[643.2 Local Utility Adjustments - Public and Private\|643.2 Local Utility Adjustments - Public and Private]]
			\|-
			\|[[643.3 Policy, Standards and Regulations\|643.3 Policy, Standards and Regulations]]
			\|}

	==603.1 Construction Inspection Guidelines for [http://www.modot.mo.gov/business/standards_and_specs/Sec0603.pdf Sec 603]==		==603.1 Construction Inspection Guidelines for [http://www.modot.mo.gov/business/standards_and_specs/Sec0603.pdf Sec 603]==

Smithk: article construction

2008-02-21T15:56:40Z

article construction

← Older revision		Revision as of 10:56, 21 February 2008
Line 55:		Line 55:
	Test results shall be recorded through SiteManager.		Test results shall be recorded through SiteManager.

	'''Sample Record.''' The sample record shall be completed in SiteManager according to [[Automation ~~Sec~~ 3510]] and shall indicate acceptance, qualified acceptance, or rejection. A copy of the certification shall be attached to the district's hard copy. Appropriate remarks, as described in [[106.9 Reporting Test Results\|106.9 Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on appropriate templates under the Tests tab.		'''Sample Record.''' The sample record shall be completed in SiteManager according to [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510] and shall indicate acceptance, qualified acceptance, or rejection. A copy of the certification shall be attached to the district's hard copy. Appropriate remarks, as described in [[106.9 Reporting Test Results\|106.9 Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on appropriate templates under the Tests tab.

Smithk: metric removal

2007-09-18T17:55:27Z

metric removal

← Older revision		Revision as of 12:55, 18 September 2007
Line 21:		Line 21:
	===603.2.1 Apparatus===		===603.2.1 Apparatus===

	(a) Micrometer or vernier caliper capable of measuring to 0.0001 in. ~~(0.00254 mm)~~ and		(a) Micrometer or vernier caliper capable of measuring to 0.0001 in. and accurate to within at least 0.001 in.
	accurate to within at least 0.001 in~~. (0.0254 mm)~~.

	(b) Rule with suitable graduations to accurately measure the material to be inspected.		(b) Rule with suitable graduations to accurately measure the material to be inspected.

	(c) Balance or scale accurate to within 0.5 percent of the weight ~~(mass)~~ of the sample to be		(c) Balance or scale accurate to within 0.5 percent of the weight of the sample to be weighed.
	weighed.

	===603.2.2 Procedure===		===603.2.2 Procedure===
Line 37:		Line 35:

	====603.2.2.2 Sampling====		====603.2.2.2 Sampling====
	In general, no Laboratory samples are required for these materials. However, random samples of Type K copper water tube may be submitted to the Laboratory at the discretion of the district. These samples shall be a minimum of 18 in. ~~(450 mm)~~ long. The inspector shall indicate on the identification sheet that the certifications have been examined and found to be applicable to the sample and show compliance with the Specifications.		In general, no Laboratory samples are required for these materials. However, random samples of Type K copper water tube may be submitted to the Laboratory at the discretion of the district. These samples shall be a minimum of 18 in. long. The inspector shall indicate on the identification sheet that the certifications have been examined and found to be applicable to the sample and show compliance with the Specifications.

	===603.2.3 Report (Records)===		===603.2.3 Report (Records)===
Line 53:		Line 51:
	:(a) Diameter and wall thickness.		:(a) Diameter and wall thickness.

	:(b) Weight per linear foot ~~(mass per linear meter)~~.		:(b) Weight per linear foot.

	Test results shall be recorded through SiteManager.		Test results shall be recorded through SiteManager.

	'''Sample Record.''' The sample record shall be completed in SiteManager according to [[Automation Sec 3510]] and shall indicate acceptance, qualified acceptance, or rejection. A copy of the certification shall be attached to the district's hard copy. Appropriate remarks, as described in [[106.9 Reporting Test Results\|106.9 Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on appropriate templates under the Tests tab.		'''Sample Record.''' The sample record shall be completed in SiteManager according to [[Automation Sec 3510]] and shall indicate acceptance, qualified acceptance, or rejection. A copy of the certification shall be attached to the district's hard copy. Appropriate remarks, as described in [[106.9 Reporting Test Results\|106.9 Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on appropriate templates under the Tests tab.