Difference between revisions of "127.9 Floodplain Management"

From Engineering_Policy_Guide
Jump to navigation Jump to search
m (updated links)
m (→‎127.9.3.1 Requirement Determination: Per BR, updated broken Memorandum of Agreement with SEMA)
 
(10 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
[[image:127.9.jpg|right|450px]]
 
[[image:127.9.jpg|right|450px]]
−
==127.9.1 Introduction==
+
==127.9.1 National Flood Insurance Program (NFIP) Requirements==
  
−
===127.9.1.1 National Flood Insurance Program Requirements===
+
The Federal Highway Administration (FHWA), through 23 CFR 650A, requires the design of all floodplain encroachments be consistent with the standards established by FEMA for the NFIP.
  
−
Acting as the Federal Highway Administration’s (FHWA’s) agent, MoDOT must evaluate every project and determine whether it could have a negative impact on the [[748.8 National Flood Insurance Program (NFIP)|base (100-year) floodplain or regulatory floodway]].  The Federal Emergency Management Agency (FEMA) and Federal Highway Administration (FHWA) guidelines 23 CFR 650 identify the base (100-year) flood as the flood having a one-percent probability of being equaled or exceeded in any given year. The base floodplain is the area of 100-year flood hazard within a county or community.  The [[748.8 National Flood Insurance Program (NFIP)#748.8.3 Floodway|regulatory floodway]] is the channel of a stream plus any adjacent floodplain areas that must be kept free of encroachment so that the 100-year flood discharge can be conveyed without increasing the base flood elevation more than a specified amount.  FEMA has mandated that projects can cause no rise in the regulatory floodway and no more than a one-foot cumulative rise for all projects where the base (100-year) flood elevation is given.
+
FEMA (44 CFR 60.3) mandates that projects:
  
−
A [[:Category:101 Standard Forms|"No-Rise" Certification]] is signed and sealed by an engineer licensed to practice in Missouri that a project will cause no rise in the regulatory floodway of a given flooding source. The project will not create any increase to the 100-year elevations on said flooding source at published cross-sections in the Flood Insurance Study for a given community and will not create any increase to the 100-year flood elevations at unpublished cross-sections in the vicinity of the proposed development.
+
:* within a special flood hazard area (base floodplain) can cause no more than a one-foot cumulative rise.
 +
:* within a regulatory floodway cannot increase Base Flood elevations.
 +
:* that do not meet the above criteria, require an approved conditional FIRM and a floodway revision (if applicable), as required by 44 CFR 65.12, before the project can be constructed.  
  
−
===127.9.1.2  Laws and Regulations===
+
For detailed information on meeting the requirements of the National Flood Insurance Program, see [[748.8 Development in Floodplains|EPG 748.8 Development in Floodplains]].
  
−
* National Flood Insurance Act (42 U.S.C. 4001-4129 and 44 CFR 59-77) of 1968 provides previously unavailable flood insurance protection to property owners in flood-prone areas.
+
==127.9.2 Laws and Regulations==
−
* Executive Order 11988: Floodplain Management (DOT Order 5650.2, 23 CFR 771, 23 CFR 650, Subpart A) of 1977 seeks “to avoid to the extent possible the long and short-term adverse impacts associated with the occupation and modification of floodplains and to avoid direct and indirect support of floodplain development wherever there is a practicable alternative.”
 
−
* National Environmental Policy Act [[127.14 National Environmental Policy Act (NEPA) Classification and Documents|(NEPA)]] of 1969.
 
  
−
==127.9.2  Process==
+
:* National Flood Insurance Act of 1968 (U.S. Code, title 42 – National Flood Insurance Program) provides flood insurance protection to property owners in flood-prone areas. Code of Federal Regulations title 44 (44 CFR Chapter 1 Subchapter B – Insurance and Hazard Mitigation) provides details and specifications of the National Flood Insurance Program.
 +
:* Executive Order 11988: Floodplain Management (DOT Order 5650.2, 23 CFR 771, 23 CFR 650, Subpart A) of 1977 seeks “to avoid to the extent possible the long and short-term adverse impacts associated with the occupation and modification of floodplains and to avoid direct and indirect support of floodplain development wherever there is a practicable alternative.”
 +
:* [http://epg.modot.org/index.php/127.14_National_Environmental_Policy_Act_(NEPA)_Classification_and_Documents National Environmental Policy Act (NEPA]) of 1969.
  
−
The district must complete and submit a Request for Environmental Services ([[127.1 Request for Environmental Services|RES]]) to the Design Division’s environmental section.  Upon receiving an RES from the district, the environmental specialist will consult SEMA to determine whether the community or county in which the project is located has been mapped for floodplain and/or floodway.  If the community or county has not been mapped, this is communicated to the district, along with the fact that no permits from SEMA will be required.  If the community has been mapped, then the environmental specialist will identify the extent of encroachment, if any, into the [[748.9 National Flood Insurance Program (NFIP)#748.9.3 Floodway|100-year floodplain and/or regulatory floodway]], whether the community participates in the [[748.9 National Flood Insurance Program (NFIP)|NFIP]].  If there is to be an encroachment into the [[748.9 National Flood Insurance Program (NFIP)#748.9.3 Floodway|regulatory floodway]], MoDOT must issue a [[:Category:101 Standard Forms|"No-Rise" Certification]] as required by SEMA to obtain a floodplain development permit that is needed for any encroachment into the 100-year floodplain, regardless of whether it also takes place within the regulatory floodway.  The environmental specialist will, via the RES response, communicate this information to the district, which will then take the appropriate steps, often in consultation with [http://wwwi/intranet/br/default.htm Bridge], to obtain the necessary permit.
+
==127.9.3 Floodplain Development Permits==
 +
{|style="padding: 0.3em; margin-left:7px; border:2px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="285px" align="right"
 +
|-
 +
|[[:Category:101 Standard Forms#Floodplain Development Permit/Application|'''Floodplain Development Permit''']]
 +
|-
 +
|[[:Category:101 Standard Forms#No-Rise Certificate|'''“No-Rise” Certification''']]
 +
|}
 +
===127.9.3.1 Requirement Determination===
 +
Communities (cities, counties or states) participating in the National Flood Insurance Program (NFIP) are required to regulate construction in the floodplain. Communities accomplish this by requiring permits for development in special flood hazard areas. The State Emergency Management Agency (SEMA) has been granted authority ([http://www.sos.mo.gov/library/reference/orders/1998/eo98_003.asp Executive Order No. 98-03]) to regulate floodplain development by state agencies and to issue floodplain development permits for state projects. SEMA requires a floodplain development permit for any development in special flood hazard areas, regardless of whether the community is participating in the NFIP or not.  
  
−
==127.9.3  [[:Category:138 Project Development Chronology|Project Development]] Milestones==
+
When a Floodplain Development Permit is required and part of a project is within a Regulatory Floodway, a [[:Category:101 Standard Forms#No-Rise Certificate|“No-Rise” Certification]] must be provided with the Floodplain Development Permit Application.  A “No-Rise” Certification is signed and sealed by an engineer licensed to practice in Missouri that a project will cause no rise in the regulatory floodway of a given flooding source. This confirms that the project will not create any increase to the Base Flood elevations on said flooding source at published cross-sections in the Flood Insurance Study for a given community and will not create any increase to the Base Flood elevations at unpublished cross-sections in the vicinity of the proposed development.
  
−
===127.9.3.1  Initial Screening Stage===
+
MoDOT has a [https://modotgov.sharepoint.com/sites/br/Hydraulics/Forms/AllItems.aspx?id=%2Fsites%2Fbr%2FHydraulics%2FFloodplain%20Permits%2F3%5FMemorandum%2Dof%2DAgreement%2FMOA%2D20140115%5Fto%5F20190115%2Epdf&parent=%2Fsites%2Fbr%2FHydraulics%2FFloodplain%20Permits%2F3%5FMemorandum%2Dof%2DAgreement Memorandum of Agreement (MOA)] with SEMA to allow some construction and maintenance activities to be done without applying for a Floodplain Development Permit.
  
−
At the initial project screening stage if maps are available, the environmental specialist will identify whether the project takes place in a county or community that participates in the [[748.9 National Flood Insurance Program (NFIP)|NFIP]] and the extent of the encroachment into the [[748.9 National Flood Insurance Program (NFIP)#748.9.3 Floodway|regulatory floodway and/or 100-year floodplain]].
+
MoDOT also has Statewide Floodplain Development Permits with SEMA for specific maintenance activities in floodways.
  
−
The district initiates this process by submitting an [[127.1 Request for Environmental Services| RES]] to the Design Division. Any findings pertinent to the project will be relayed to the district in the RES response.
+
Specifics of the project along with [[748.8 Development in Floodplains #748.8.2 FEMA Floodplain Products|FEMA Floodplain Products]], MoDOT’s MOA and Statewide Floodplain Development Permits with SEMA are used to determine if a Floodplain Development Permit is required and if “No-Rise” Certificate is required to be provided with the permit application. The following flow chart can be used to aid in this determination.
 +
 +
[[image:127.9.3.1.jpg|center|850px]]
  
−
===127.9.3.2 Location/Conceptual Plan Stage===
+
===127.9.3.2 Process===
 +
The [https://modotgov.sharepoint.com/sites/DE/SitePages/Environmental-&-Historic-Preservation.aspx Design Division's Environmental Section] reviews Request for Environmental Services (RES) at Project Development Milestones to determine whether there will be any encroachment into a floodplain, subject to NFIP requirements, and provides the results of these reviews to the district in the RES response.
 +
 +
Bridge Division and/or district Design in consultation with Design Division’s Environmental Section will be responsible for determining whether a floodplain development permit is required on the project, and for providing SEMA with any project information necessary to obtain the permit, including any required “No-Rise” certifications for work in a regulated floodway. Any required notifications to SEMA will be made by Environmental Section.
  
−
At the location/conceptual plan stage if floodplain impact was not evaluated previously, the environmental specialist will identify whether the project takes place in a county or community that participates in the [[748.9 National Flood Insurance Program (NFIP)|NFIP]] and initialize a floodplain/floodway encroachment study for the project.
+
If the action will affect the base floodplain, as determined by 23 CFR 650.107, the environmental specialist will also include an evaluation and discussion in the NEPA document or RES as required under [https://www.law.cornell.edu/cfr/text/23/650.111 23 CFR 650.111(e)].
  
−
The district initiates this process by submitting an [[127.1 Request for Environmental Services| RES]] to the design division. Any new findings pertinent to the project will be relayed to the district in the RES response.
+
===127.9.3.3 Responsibilities===
 +
If a permit is necessary, the [https://modotgov.sharepoint.com/sites/br Bridge Division] will obtain the floodplain development permit(s) from SEMA for project elements that involve:
  
−
===127.9.3.3  Preliminary Plans Stage===
+
:* construction of new numbered structures
 +
:* modifications to existing numbered structures below the Base Flood Elevation
 +
:* Roadway/maintenance structures/repairs where Bridge Division does a detailed hydraulic analysis.
  
−
At the preliminary plans stage if floodplain impact was not previously evaluated, the environmental specialist will identify whether the project takes place in a county or community that participates in the [[748.9 National Flood Insurance Program (NFIP)|NFIP]] and initialize a floodplain/floodway encroachment study for the project.
+
The district will obtain the permit(s) for project elements that involve:
  
−
The district initiates this process by submitting an [[127.1 Request for Environmental Services| RES]] to the design division. Any new findings pertinent to the project will be relayed to the district in the RES response.
+
:* un-numbered structures that are not included in a permit acquired by Bridge Division.
 +
:* roadway fill in a regulated floodplain that is not included in a permit acquired by Bridge Division.
 +
:* slope or scour repairs that do not involve numbered structures.
 +
:* slope or scour repairs at numbered structures, when no modifications to the existing structure are being made below the Base Flood Elevation.
  
−
===127.9.3.4  Right of Way Plan Stage===
+
Responsibility for situations that do not fit into one of the above categories will be determined on a case by case basis through consultation between the district and Bridge Division.
  
−
At the right-of-way plan stage if floodplain impact was not previously evaluated, the environmental specialist will identify whether the project takes place in a county or community that participates in the [[748.9 National Flood Insurance Program (NFIP)|NFIP]] and initialize a floodplain/floodway encroachment study for the project.
+
===127.9.3.4 Completing a Floodplain Development Permit Application and “No-Rise” Certification===
 +
The SEMA [[:Category:101 Standard Forms#Floodplain Development Permit/Application|Floodplain Development Permit]] and [[:Category:101 Standard Forms#No-Rise Certificate|“No-Rise” Certification]] (when required) are to be completed with care, particularly:
  
−
The district initiates this process by submitting an [[127.1 Request for Environmental Services| RES]] to the design division. Any new findings pertinent to the project will be relayed to the district in the RES response.
+
:* Property Owner shall be listed as: Missouri Highways and Transportation Commission; 105 West Capitol Avenue, Jefferson City, Missouri 65102.  
 +
:* Community and County information should be provided for the actual location of the affected floodplain.
 +
:* Determination of the quarter-quarter section, township and range
 +
:* Type of Development: must include all aspects of the proposed construction, including grading, fill, and pavement in addition to proposed structures
 +
:* Information on premises, value of improvements, elevation of proposed development site and State of Missouri Ordinance Elevation are not required for roadway infrastructure
 +
:* Floodway/floodway fringe, Special Flood Hazard Area designation
 +
:* Base flood elevation and datum: the Flood Insurance Study’s Base Flood Elevation from the flood profile should be given if available
 +
:* Current map date
 +
:* Fields not filled with data should be marked N/A
 +
:* Other Permits Required fields must be coordinated with the Environmental section of Design. The 404 Permit must be obtained by MoDOT prior to SEMA issuing the floodplain development permit.
  
−
===127.9.3.5 Final Design Stage===
+
The application for the permit shall include a [https://msc.fema.gov/portal/home FIRMette] with the project location(s) noted.
  
−
Floodplain impact should have been previously evaluated, as any required floodplain development permit and [[:Category:101 Standard Forms|"No-Rise" Certification]] should be obtained before final design stage.  If floodplain impact was overlooked and has not been evaluated by the final design stage, the environmental specialist will initialize a floodplain/floodway encroachment study for the project.  However, the project may be delayed since any required [[748.9 National Flood Insurance Program (NFIP)#748.9.1 Floodplain Development Permit|floodplain development permit]] and "no-rise" certification must be obtained before letting.
+
==127.9.4 [[:Category:138 Project Development Chronology|Project Development]] Milestones==
  
−
The district initiates this process by submitting an [[127.1 Request for Environmental Services| RES]] to the Design Division. Any new findings pertinent to the project will be relayed to the district in the RES response.
+
===127.9.4.1 Location/Conceptual Plans Stage===
 +
When the district submits the Location/Conceptual Plans RES, the environmental specialist will identify whether the project is located in a 1% floodplain and/or the regulatory floodway. If the project will encroach upon the 1% floodplain and/or the regulatory floodway, the environmental specialist will communicate this to the district via the RES response.  
  
−
===127.9.3.6  Letting===
+
===127.9.4.2 Preliminary Plans Stage===
 +
When the district submits the Preliminary Plans RES, if floodplain impact was not previously evaluated, the environmental specialist will identify whether the project is located in a 1% floodplain and/or regulatory floodway. If the project will encroach upon the 1% floodplain and/or the regulatory floodway, the environmental specialist will communicate this to the district via the RES response.
 +
 
 +
===127.9.4.3 Right of Way Plans Stage===
 +
When the district submits the Right of Way Plans RES, if floodplain impact was not previously evaluated, the environmental specialist will identify whether the project is located in a 1% floodplain and/or the regulatory floodway. If the project will encroach upon the 1% floodplain and/or the regulatory floodway, the environmental specialist will communicate this to the district via the RES response.  
 +
 
 +
===127.9.4.4 Final Design Plans Stage===
 +
When the district submits the Final Design Plans Stage RES, floodplain impact should have previously been evaluated and any required floodplain development permits should already be obtained. If floodplain impact was overlooked and has not been evaluated, or if there has been a change that may cause the project to encroach upon the 1% floodplain and/or regulatory floodway, the environmental specialist will identify whether the project is located in a 1% floodplain and/or regulatory floodway. However, the project may be delayed since any required floodplain development permit must be obtained prior to the letting.
 +
 
 +
===127.9.4.5 Letting===
 +
Floodplain/Floodway impacts must be known prior to letting and any required [[#127.9.3 Floodplain Development Permits|floodplain development permits]] must have been obtained. The project may be delayed until these permits are received.
  
−
Floodplain impacts must be known prior to letting as any required [[748.9 National Flood Insurance Program (NFIP)#748.9.1 Floodplain Development Permit|floodplain development permit]] and [[:Category:101 Standard Forms|"No-Rise" Certification]] must have been obtained prior to letting.  The project may be delayed until these permits are received.
 
  
 
[[Category:127 MoDOT and the Environment|127.09]]
 
[[Category:127 MoDOT and the Environment|127.09]]

Latest revision as of 13:53, 28 April 2022

450px

127.9.1 National Flood Insurance Program (NFIP) Requirements

The Federal Highway Administration (FHWA), through 23 CFR 650A, requires the design of all floodplain encroachments be consistent with the standards established by FEMA for the NFIP.

FEMA (44 CFR 60.3) mandates that projects:

  • within a special flood hazard area (base floodplain) can cause no more than a one-foot cumulative rise.
  • within a regulatory floodway cannot increase Base Flood elevations.
  • that do not meet the above criteria, require an approved conditional FIRM and a floodway revision (if applicable), as required by 44 CFR 65.12, before the project can be constructed.

For detailed information on meeting the requirements of the National Flood Insurance Program, see EPG 748.8 Development in Floodplains.

127.9.2 Laws and Regulations

  • National Flood Insurance Act of 1968 (U.S. Code, title 42 – National Flood Insurance Program) provides flood insurance protection to property owners in flood-prone areas. Code of Federal Regulations title 44 (44 CFR Chapter 1 Subchapter B – Insurance and Hazard Mitigation) provides details and specifications of the National Flood Insurance Program.
  • Executive Order 11988: Floodplain Management (DOT Order 5650.2, 23 CFR 771, 23 CFR 650, Subpart A) of 1977 seeks “to avoid to the extent possible the long and short-term adverse impacts associated with the occupation and modification of floodplains and to avoid direct and indirect support of floodplain development wherever there is a practicable alternative.”
  • National Environmental Policy Act (NEPA) of 1969.

127.9.3 Floodplain Development Permits

Floodplain Development Permit
“No-Rise” Certification

127.9.3.1 Requirement Determination

Communities (cities, counties or states) participating in the National Flood Insurance Program (NFIP) are required to regulate construction in the floodplain. Communities accomplish this by requiring permits for development in special flood hazard areas. The State Emergency Management Agency (SEMA) has been granted authority (Executive Order No. 98-03) to regulate floodplain development by state agencies and to issue floodplain development permits for state projects. SEMA requires a floodplain development permit for any development in special flood hazard areas, regardless of whether the community is participating in the NFIP or not.

When a Floodplain Development Permit is required and part of a project is within a Regulatory Floodway, a “No-Rise” Certification must be provided with the Floodplain Development Permit Application. A “No-Rise” Certification is signed and sealed by an engineer licensed to practice in Missouri that a project will cause no rise in the regulatory floodway of a given flooding source. This confirms that the project will not create any increase to the Base Flood elevations on said flooding source at published cross-sections in the Flood Insurance Study for a given community and will not create any increase to the Base Flood elevations at unpublished cross-sections in the vicinity of the proposed development.

MoDOT has a Memorandum of Agreement (MOA) with SEMA to allow some construction and maintenance activities to be done without applying for a Floodplain Development Permit.

MoDOT also has Statewide Floodplain Development Permits with SEMA for specific maintenance activities in floodways.

Specifics of the project along with FEMA Floodplain Products, MoDOT’s MOA and Statewide Floodplain Development Permits with SEMA are used to determine if a Floodplain Development Permit is required and if “No-Rise” Certificate is required to be provided with the permit application. The following flow chart can be used to aid in this determination.

127.9.3.1.jpg

127.9.3.2 Process

The Design Division's Environmental Section reviews Request for Environmental Services (RES) at Project Development Milestones to determine whether there will be any encroachment into a floodplain, subject to NFIP requirements, and provides the results of these reviews to the district in the RES response.

Bridge Division and/or district Design in consultation with Design Division’s Environmental Section will be responsible for determining whether a floodplain development permit is required on the project, and for providing SEMA with any project information necessary to obtain the permit, including any required “No-Rise” certifications for work in a regulated floodway. Any required notifications to SEMA will be made by Environmental Section.

If the action will affect the base floodplain, as determined by 23 CFR 650.107, the environmental specialist will also include an evaluation and discussion in the NEPA document or RES as required under 23 CFR 650.111(e).

127.9.3.3 Responsibilities

If a permit is necessary, the Bridge Division will obtain the floodplain development permit(s) from SEMA for project elements that involve:

  • construction of new numbered structures
  • modifications to existing numbered structures below the Base Flood Elevation
  • Roadway/maintenance structures/repairs where Bridge Division does a detailed hydraulic analysis.

The district will obtain the permit(s) for project elements that involve:

  • un-numbered structures that are not included in a permit acquired by Bridge Division.
  • roadway fill in a regulated floodplain that is not included in a permit acquired by Bridge Division.
  • slope or scour repairs that do not involve numbered structures.
  • slope or scour repairs at numbered structures, when no modifications to the existing structure are being made below the Base Flood Elevation.

Responsibility for situations that do not fit into one of the above categories will be determined on a case by case basis through consultation between the district and Bridge Division.

127.9.3.4 Completing a Floodplain Development Permit Application and “No-Rise” Certification

The SEMA Floodplain Development Permit and “No-Rise” Certification (when required) are to be completed with care, particularly:

  • Property Owner shall be listed as: Missouri Highways and Transportation Commission; 105 West Capitol Avenue, Jefferson City, Missouri 65102.
  • Community and County information should be provided for the actual location of the affected floodplain.
  • Determination of the quarter-quarter section, township and range
  • Type of Development: must include all aspects of the proposed construction, including grading, fill, and pavement in addition to proposed structures
  • Information on premises, value of improvements, elevation of proposed development site and State of Missouri Ordinance Elevation are not required for roadway infrastructure
  • Floodway/floodway fringe, Special Flood Hazard Area designation
  • Base flood elevation and datum: the Flood Insurance Study’s Base Flood Elevation from the flood profile should be given if available
  • Current map date
  • Fields not filled with data should be marked N/A
  • Other Permits Required fields must be coordinated with the Environmental section of Design. The 404 Permit must be obtained by MoDOT prior to SEMA issuing the floodplain development permit.

The application for the permit shall include a FIRMette with the project location(s) noted.

127.9.4 Project Development Milestones

127.9.4.1 Location/Conceptual Plans Stage

When the district submits the Location/Conceptual Plans RES, the environmental specialist will identify whether the project is located in a 1% floodplain and/or the regulatory floodway. If the project will encroach upon the 1% floodplain and/or the regulatory floodway, the environmental specialist will communicate this to the district via the RES response.

127.9.4.2 Preliminary Plans Stage

When the district submits the Preliminary Plans RES, if floodplain impact was not previously evaluated, the environmental specialist will identify whether the project is located in a 1% floodplain and/or regulatory floodway. If the project will encroach upon the 1% floodplain and/or the regulatory floodway, the environmental specialist will communicate this to the district via the RES response.

127.9.4.3 Right of Way Plans Stage

When the district submits the Right of Way Plans RES, if floodplain impact was not previously evaluated, the environmental specialist will identify whether the project is located in a 1% floodplain and/or the regulatory floodway. If the project will encroach upon the 1% floodplain and/or the regulatory floodway, the environmental specialist will communicate this to the district via the RES response.

127.9.4.4 Final Design Plans Stage

When the district submits the Final Design Plans Stage RES, floodplain impact should have previously been evaluated and any required floodplain development permits should already be obtained. If floodplain impact was overlooked and has not been evaluated, or if there has been a change that may cause the project to encroach upon the 1% floodplain and/or regulatory floodway, the environmental specialist will identify whether the project is located in a 1% floodplain and/or regulatory floodway. However, the project may be delayed since any required floodplain development permit must be obtained prior to the letting.

127.9.4.5 Letting

Floodplain/Floodway impacts must be known prior to letting and any required floodplain development permits must have been obtained. The project may be delayed until these permits are received.

Retrieved from "https://epgtest.modot.org/index.php?title=127.9_Floodplain_Management&oldid=51428"