Difference between revisions of "771.15 Concrete Bridge Deck Sealer Selection Matrix"
Jump to navigation
Jump to search
m (New article from MT and BR; old EPG 771.15 Chip Seal to Entire Deck moved to EPG 771.19 Chip Seal to Entire Deck) |
m |
||
| (One intermediate revision by the same user not shown) | |||
| Line 7: | Line 7: | ||
|width="450"|New Decks and Decks with minimal cracking||width="550" |[[771.16 Penetrating Concrete Sealer - Silane|EPG 771.16 Penetrating Concrete Sealer - Silane]] | |width="450"|New Decks and Decks with minimal cracking||width="550" |[[771.16 Penetrating Concrete Sealer - Silane|EPG 771.16 Penetrating Concrete Sealer - Silane]] | ||
|- | |- | ||
| − | |Decks with hairline cracks < 1/128” (0.008 in.) wide||[[771.17 Low Viscosity Polymer (LVP) | + | |Decks with hairline cracks < 1/128” (0.008 in.) wide||[[771.17 Concrete Crack Filler -Low Viscosity Polymer (LVP)|EPG 771.17 Concrete Crack Filler -Low Viscosity Polymer (LVP)]] |
|- | |- | ||
|Decks with cracks >1/128” (0.008 in.) wide|| [[771.18 In-Deck Bridge Deck Crack Filler|EPG 771.18 In-Deck Bridge Deck Crack Filler]] | |Decks with cracks >1/128” (0.008 in.) wide|| [[771.18 In-Deck Bridge Deck Crack Filler|EPG 771.18 In-Deck Bridge Deck Crack Filler]] | ||
| Line 23: | Line 23: | ||
| − | [[Category:771 Bridge | + | [[Category:771 Bridge Preventive Maintenance Guidelines|771.15]] |
Latest revision as of 08:53, 22 November 2016
The following matrix should be used in the selection of bridge deck preventive maintenance treatments:
| Recommended Concrete Bridge Deck Sealer Selection Matrix | |
|---|---|
| New Decks and Decks with minimal cracking | EPG 771.16 Penetrating Concrete Sealer - Silane |
| Decks with hairline cracks < 1/128” (0.008 in.) wide | EPG 771.17 Concrete Crack Filler -Low Viscosity Polymer (LVP) |
| Decks with cracks >1/128” (0.008 in.) wide | EPG 771.18 In-Deck Bridge Deck Crack Filler |
| Decks with cracks >1/64” (0.016 in.) wide | EPG 771.19 Chip Seal to Entire Deck |
Crack Measurement Equivalents:
- 1/16" = 1.60 mm (0.0625 in) (60 mils)
- 1/32" = 0.80 mm (0.0312 in) (30 mils)
- 1/64" = 0.40 mm (0.0156 in) (15 mils)
- 1/128" = 0.20 mm (0.0078 in) (7.5 mils)
