1045.6 Laboratory Testing Guidelines for Sec 1045

This article establishes procedures for Laboratory testing and reporting samples of paint and paint materials. Refer to Sec 1045 for MoDOT’s specifications.

1045.6.1 Procedure

1045.6.1.1 Pigment and Vehicle Constituents

Test these materials in accordance with the following methods:

Inorganic Zinc Silicate Pigment, Metallic Zinc, percent - ASTM D521

Total Zinc, percent - ASTM D3280.

Inorganic Zinc Silicate Vehicle- ASTM D1644, Method A.

1045.6.1.2 Mixed Paint

The following paints shall be tested according to the methods shown for each material.

a) High Solids Inorganic Zinc Silicate Paint. This material is to be tested according to Sec 1045.2.

b) Intermediate Coat - High Solids Epoxy System G Finish Coat - Polyurethane System G.

Sag Resistance, Leneta Anti-Sag Meter - Sec. 4494 FTMS 141

Viscosity, Krebs - Stormer - ASTM D 562

Drying Time - ASTM D 1640

Volatile Organic Content - USEPA Method 24

Color - Federal Standard No. 595b

Fineness of Grind, Hegeman Gage - ASTM D 1210

c) Intermediate and Finish Coat Waterborne Acrylic System H

Color, Federal Standard 595b

Viscosity, Krebs-Stormer - ASTM D 562

Volatile Organic Content - USEPA Method 24

Fineness of Grind, Hegeman Gage - ASTM D 1210

Drying Time - ASTM D 1640

Sag Resistance, Leneta Anti-Sag Meter - Sec. 4494 FTMS 141

d) Aluminum Epoxy Mastic Primer

Color, Federal Standard 595b

Volatile Organic Content - USEPA Method 24

Fineness of Grind, Hegeman Gage - ASTM D 1210

Drying Time - ASTM D1640

e) Gray Epoxy Mastic Primer

Color, Federal Standard 595b

Volatile Organic Content - USEPA Method 24

Fineness of Grind, Hegeman Gage - ASTM D 1210

Drying Time - ASTM D 1640

f) Calcium Sulfonate Sealer/Primer/Topcoat

Color, Federal Standard 595b

Volatile Organic Content - USEPA Method 24

Fineness of Grind, Hegeman Gage - ASTM D 1210

Viscosity, #4 Ford Cup - ASTM D 1200

Drying Time – Federal Test Method Std. No. 141, Method 4061

Sag Test (multi-notch blade) – Federal Test Method Std. No. 141, Method 4494

Pigment Settlement – ASTM D 869

Working Properties – Federal Test Method Std. No. 141, Method 4331

Storage – Federal Test Method Std. No. 141, Method 3011

All test data and calculations are to be recorded in Laboratory workbooks. Test results are then to be recorded through SiteManager.

1045.6.2 Sample Record

The sample record shall be completed in SiteManager, as described in Automation Section 3510, and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in EPG 106.20 Reporting, are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.