This is the Engineering Policy Guide Test Site and not up to date. Please visit the current Engineering Policy Guide here.

1028.5 Laboratory Testing Guidelines for Sec 1028

From Engineering Policy Guide
Revision as of 09:26, 22 August 2013 by Smithk (talk | contribs) (updated link)

This article establishes procedures for Laboratory testing and reporting of concrete drain tile. Refer to Sec 1028 for MoDOT's specifications.

1028.5.1 Procedure

Tests consist of absorption only. Samples shall be tested in accordance with AASHTO T280. Test results and calculations shall be recorded through SiteManager.

1028.5.2 Sample Record

The sample record shall be completed in SiteManager, as described in Sample Record General Information , and shall indicate acceptance, qualified acceptance or rejection. Appropriate remarks, as described in EPG 106.20 Reporting, are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

Retrieved from "https://epgtest.modot.org/index.php?title=1028.5_Laboratory_Testing_Guidelines_for_Sec_1028&oldid=31983"