This is the Engineering Policy Guide Test Site and not up to date. Please visit the current Engineering Policy Guide here.

1047.9 Laboratory Testing Guidelines for Sec 1047

From Engineering Policy Guide
Revision as of 12:11, 22 August 2013 by Smithk (talk | contribs) (updated link)

This article establish procedures for laboratory testing and reporting samples of corrugated polyethylene culvert pipe. Refer to Sec 1047 for MoDOT’s specifications.

1047.6.1 Procedure

Tests consist of workmanship, pipe dimensions, pipe stiffness, pipe flattening, brittleness, and environmental stress cracking. All tests shall be conducted in accordance with AASHTO M 294.

1047.6.2 Sample Record

The sample record shall be completed in SiteManager, as described in Sample Record General Information , and shall indicate acceptance, qualified acceptance or rejection. Appropriate remarks, as described in EPG 106.20 Reporting, are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

Retrieved from "https://epgtest.modot.org/index.php?title=1047.9_Laboratory_Testing_Guidelines_for_Sec_1047&oldid=32000"