This is the Engineering Policy Guide Test Site. To view the current EPG click here

617.4 Laboratory Testing Guidelines for Sec 617

From Engineering_Policy_Guide
Revision as of 10:07, 14 September 2021 by Smithk (talk | contribs) (Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This article establishes procedures for Laboratory testing and reporting of concrete cylinders which represent material used in concrete median barriers. Refer to Sec 617 for MoDOT’s specifications.

617.4.1 Procedure

Concrete cylinders shall be tested for compressive strength according to AASHTO T22. Test results and calculations shall be recorded through AASHTOWARE Project (AWP).

617.4.2 Sample Record

The sample record shall be completed in AASHTOWARE Project (AWP), as described in AWP MA Sample Record, General, and shall indicate acceptance, qualified acceptance or rejection. The notation "Specimens submitted for compressive strength at the age indicated" should be included in the sample record remarks. Test results shall be reported on the appropriate templates under the Tests tab.

Retrieved from "https://epgtest.modot.org/index.php?title=617.4_Laboratory_Testing_Guidelines_for_Sec_617&oldid=50035"