Difference between revisions of "1047.9 Laboratory Testing Guidelines for Sec 1047"
m (updated link) |
m (updated link) |
||
| Line 1: | Line 1: | ||
| − | This article establish procedures for laboratory testing and reporting samples of corrugated polyethylene culvert pipe. Refer to [http://www.modot. | + | This article establish procedures for laboratory testing and reporting samples of corrugated polyethylene culvert pipe. Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1047] for MoDOT’s specifications. |
==1047.6.1 Procedure== | ==1047.6.1 Procedure== | ||
Revision as of 11:38, 15 June 2016
This article establish procedures for laboratory testing and reporting samples of corrugated polyethylene culvert pipe. Refer to Sec 1047 for MoDOT’s specifications.
1047.6.1 Procedure
Tests consist of workmanship, pipe dimensions, pipe stiffness, pipe flattening, brittleness, and environmental stress cracking. All tests shall be conducted in accordance with AASHTO M 294.
1047.6.2 Sample Record
The sample record shall be completed in SiteManager, as described in Sample Record General Information 
, and shall indicate acceptance, qualified acceptance or rejection. Appropriate remarks, as described in EPG 106.20 Reporting, are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.
