Help Article

From Engineering_Policy_Guide
Revision as of 15:30, 23 September 2024 by Hoskir (talk | contribs) (→‎Division Contacts)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The Engineering Policy Guide (EPG) contains MoDOT policy, procedure and guidance for the planning, design, construction and maintenance of roadway and related facilities. It also includes specific technical topics of right of way, bridge, traffic and materials. These articles are numbered to reflect as closely as possible the pay items and divisions from Missouri Standard Specifications for Highway Construction.

The EPG is not a contract document and EPG articles are referenced as EPG XXX.X or "articles" - not "sections" - to avoid confusion with MoDOT specifications. Where a conflict exists between the EPG and a contract, the contract document rules. References and links to the Missouri Standard Specifications are given as "Sec XXX.XX" or "Section XXX.XX of the Standard Specifications." References and links to the Missouri Standard Plans for Highway Construction are "Standard Plan XXX.XX".

Organization

Articles are grouped into the specification book’s divisions (for example, the EPG articles in EPG 100 General mirror Division 100 specifications, articles in EPG 300 Bases mirror Division 300 specifications, etc.). Many articles have been subdivided into additional articles. For example, the reader may notice that EPG 903.6 Warning Signs and other EPG 903 articles are listed at the bottom of EPG 903 Highway Signing.

While every effort has been made to base the article numbers on MoDOT pay items and specifications, not all articles in the EPG are reflected in the pay items and specifications. For example, many EPG “100 General” articles are important to the design and construction of roadway facilities but do not directly correspond to specific pay items. Some of these are:

Similar examples are to be found in the EPG 200, EPG 300, etc. articles.

How to Easily Select and Print an Entire Article or a Portion of an Article Using Microsoft Edge

1) Highlight the selected article or portion of article

Help Article Print01 2022.jpg


2) Right-click on the select text and select Print (You can also use the shortcut Ctrl+P)

Help Article Print02 2022.jpg

3) Change your print options as needed

Help Article Print03 2022.jpg

4) Should your selection include a large table or figure that creates an undesirable appearance, you can select More settings to change your paper size or change the scale of your print

Help Article Print04 2022.jpg

5) Once you have selected your settings just select the Print Button

Signing Up for E-Updates

To Sign up for the Engineering Policy Guide E-updates CLICK HERE.

1) Either select New Subscriber or Returning Subscriber.

Subscribe image.png

2) If you are a New Subscriber you will need to fill out all the account information.

3) Make sure you select how you want to receive the updates.

Subscribe2 image.png

4) Scroll down towards the bottom to the Engineering Policy Section and check the box that says Engineering Policy Guide (EPG).

Subscribe3 image.png

5) Check any other items you would like to receive E-updates on. Once you are done select Submit at the bottom of the page.

EPS Approval Process

Revision-request 2022.png

Revisions to engineering policy are proposed using the Engineering Policy Revision Request Form. Revisions to forms used in the EPG are also proposed by using the Engineering Policy Revision Request Form.

Any other policy affected by a proposed EPS revision?

Provide electronic files of all the revisions to other MoDOT policies (other EPG articles, any Standard Plans, Specifications, JSPs, etc.) impacted by the EPG proposal. Word files in revision mode are required for textual changes. Dgn files are preferred for Standard Plan revisions although a redlined hard copy showing the proposed changes is also acceptable.

Completing the Engineering Policy Revision Request Form

Every proposal must document the following:

  • Date - Enter the date you are submitting your request.
  • Issue Name - Please provide a brief description of the issue.
  • Contact - The name of the sponsor(s) from within the division submitting the revision request is required.
  • Summary Provide the reason why the proposed revision(s) is necessary or its benefit to the Department. This will help with the approval process.
  • Fiscal Impact - Provide a dollar estimate for the proposal’s costs or savings to MoDOT. Include necessary calculations (initial savings or life cycle savings, for example) or assertions to accurately convey the proposal’s financial impact. The fiscal impact should be a numeric dollar value.
  • FHWA Involvement - FHWA should be involved with major policy revisions. Describe efforts to engage FHWA in the development of this policy revision. Attach specific documentation regarding reviews, comments, etc. below. If FHWA was not part of this policy review, please explain why not.
  • External Involvement - Provide a summary of efforts undertaken during the development of the item to engage affected industry groups and the FHWA. Provide specific examples of who was involved and how the involvement occurred. This is not applicable to every submittal, but is critical for the determination of the associated approval level for borderline items.
  • Administrative Rule - Select if this revision request is associated with an administrative rule. (optional)
  • Local Program (LPA) - Indicate if this relates to LPA policy (EPG 136). (optional)
  • Tracking Number - (optional)
  • Desired Effective Date - Provide the Desired Effective Letting Date (Desired timeframes or deadlines). Please be aware, ballot items may take several months for approval. (optional)
  • Affected Publications - Should a proposal for EPG 606.1 also require revisions to Sec 606 and Std. Plan 606.30, the section and standard plan as well as their proposed revisions would be specified along with the proposed revisions to the EPG article.
  • Attachments - Attach all necessary revisions by selecting the "Attach File" button. Also attach all supporting and review documents from FHWA, other agencies, and Industry. MS Word documents should be submitted in revision/track changes mode; other documents can be "marked up" versions.

After the proposed EPS revision is submitted

Tips on Text
While Engineering Policy Services edits all submittals, a few grammatical guidelines include:
Assure/Ensure/Insure: The word “assure” is a personal guarantee based on reputation. “Ensure” is used when the party is to make certain of something or to be careful. “Insure” refers to actions protected by insurance, and indicates that money is involved.
Dimensions: Typically use “high”, “wide” and “long” instead of “in height”, “in width” and “in length”.
Farther/Further: Use “farther” to express a physical distance, such as 10 miles farther, and “further” for a non-physical dimension, such as further thought.
Fewer/less: Use “few” or “fewer” for something comprised of a small number of countable components (such as fewer dollars, fewer gallons of water, etc.). Use “less” for amounts that are not being counted (less money, less water, etc.).
Gender: Minimize the use of “he/she”, “he and she” and “she or he”.
High/Tall: Use “high” to express a lofty position, such as the clouds are high. Use “tall” to express a great vertical dimension, such as the tall post.
Until: Do not use "til".

Submittals are evaluated and processed on a quarterly schedule. Final decisions on proposed ballots are submitted to the Policy and Innovations Engineer for disposition. The Assistant Chief Engineer submits the final decision on Level 2 revisions and the Chief Engineer submits the final decision on Level 3 revisions. Proposed revisions will be categorized by the Policy and Innovations Engineer based on the following guidelines:

Level 1 Approval. If, upon submittal in the Engineering Policy Revision Request Form, a proposed revision is determined to be a routine technical matter, an errata correction or a clarification, it can be approved by the Policy and Innovations Engineer without comment from the district engineers, the division engineers or the Chief Engineer. The EPG will be revised as necessary.

Level 2 Approval. If, upon submittal in the Engineering Policy Revision Request Form, a proposed revision is determined to be a moderate technical change, if it requires specific expertise (e.g. structural design, etc.) or if it impacts more than one division, the proposal is processed as a Level 2 Ballot item. The District Engineers and Division Directors/Engineers are provided 10 business days to provide their comments to the Assistant Chief Engineer who will consider the idea before providing a decision to the Policy and Innovations Engineer. The Federal Highway Administration is given 10 working days to provide comment or concurrence with the Policy and Innovations Engineer. Upon approval any associated documents and the EPG will be revised as necessary.

Level 3 Approval. If, upon submittal in the Engineering Policy Revision Request Form, a proposed revision is determined to be a complex technical change, contentious, has high cost or impacts MoDOT's external conduct of business, the proposal is processed as a Level 3 Ballot item. The District Engineers and select Division Directors/Engineers are provided 10 business days to provide their comments to the Chief Engineer who will consider the idea before providing their decision to the Policy and Innovations Engineer. The Federal Highway Administration is provided 10 business days to provide comment or concur with the proposal. Upon approval, any associated documents and the EPG will be revised as necessary.

Changes to the Standard Specification, Standard Drawings and Pay Items are documented by Design Standards Letters.

EPS Ballot Cycles

Engineering Policy Services Ballot Schedule
Revision Requests Due Ballot Items Due Publish Revisions Effective Date
March 7, 2024 March 20, 2024 April 22, 2024 July 1, 2024
June 6, 2024 June 20, 2024 July 22, 2024 October 1, 2024
September 5, 2024 September 18, 2024 October 21, 2024 January 1, 2025
December 5, 2024 December 17, 2024 January 21, 2025 April 1, 2025
March 6, 2025 March 18, 2025 April 21, 2025 July 1, 2025
June 5, 2025 June 17, 2025 July 21, 2025 October 1, 2025
September 4, 2025 September 16, 2025 October 20, 2025 January 1, 2026

Division Contacts

Since the divisions provide authoritative input, consulting with their liaisons or contacts may provide the help you require or receive your input. Below is a listing of divisional personnel with whom the Engineering Policy staff works and who may be helpful to you:

Bridge: Darren Kemna
Chief Counsel's Office: Terri Parker
Construction and Materials:
Chemical Laboratory: Todd Bennett
Construction Engineering: Dennis Brucks, Niall Jansson, Jason Blomberg
Geotechnical Engineering: Lydia Brownell
Physical Laboratory: Brett Trautman
Design: Laura Ellen, Jennifer Becker, Dave Simmons, Alvin Nieves-Rosario
Bid & Contract Services: Ryan Martin
CADD Services: Steve Atkinson
Environmental Compliance: Melissa Scheperle
Historic Preservation: Rachel Campbell
LPA: Andy Hanks
Right of Way: Mendy Sundermeyer, Greg Wood
Highway Safety & Traffic: Katy Harlan
Safety Engineering: Katy Harlan
Signals: Ray Shank
Signs: Tom Honich, Cayci Reinkemeyer
Work Zones: Dan Smith
Maintenance: Paul Denkler
Multimodal: Jerica Holtsclaw
Aviation: Kyle LePage
Freight & Waterways: Levi Woods
Railroads: Troy Hughes
Transit: Christy Evers
Planning: Llans Taylor

FHWA Contacts

Below is a listing of FHWA personnel with whom the Engineering Policy staff works and who may be helpful to you:

ADA: Lauren Paulwell
Bridge: Scott Stotlemeyer
Construction and Materials: Félix González
Design: Brian Nevins (NE), Kevin Irving (KC & NW), Félix González (SL), Charles Pursley (CD, SE & SW)
Environmental: Rebecca Rost and Taylor Peters
Pavements: Félix González
Right of Way: Lauren Paulwell
Safety and Traffic Control: John Miller
Transportation and Planning: Cecelie Cochran and Daniel Weitkamp